Cisco Catalyst 3030 Command Reference Manual page 94

Blade switch

Hide thumbs Also See for Catalyst 3030:

Table of Contents

dot1x critical (interface configuration)

You can configure the inaccessible bypass feature and port security on the same switch port.

This example shows how to enable the inaccessible authentication bypass feature on port 1:

Switch# configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Switch(config)# interface gigabitethernet0/1

Switch(config-if)# dot1x critical

Switch(config-if)# end

Switch(config)# end

You can verify your configuration by entering the show dot1x [interface interface-id] privileged EXEC

Related Commands

dot1x critical (global configuration)

Cisco Catalyst Blade Switch 3030 Command Reference

[interface interface-id]

Cisco Catalyst Blade Switch 3030 Cisco IOS Commands

Configures the parameters for the inaccessible authentication

bypass feature on the switch.

Displays IEEE 802.1x status for the specified port.