Show Inventory - Cisco Catalyst 3030 Command Reference Manual

Blade switch

Hide thumbs Also See for Catalyst 3030:

Table of Contents

show inventory

Use the show inventory user EXEC command to display product identification (PID) information for

the hardware.

Syntax Description

Command Modes

Command History

Usage Guidelines

The command is case sensitive. With no arguments, the show inventory command produces a compact

dump of all identifiable entities that have a product identifier. The compact dump displays the entity

location (slot identity), entity description, and the unique device identifier (UDI) (PID, VID, and SN) of

that entity.

If there is no PID, no output appears when you enter the show inventory command.

Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output

are not displayed, but the lines that contain Output are displayed.

This is example output from the show inventory command:

switch# show inventory

NAME: "1", DESCR: "WS-CBS3030-DEL"

PID: WS-CBS3030-DEL-F , VID: V01, SN: FSJC0523550

NAME: "GigabitEthernet0/13", DESCR: "1000BaseSX SFP"

Cisco Catalyst Blade Switch 3030 Command Reference

show inventory [entity-name | raw] [ | {begin | exclude | include} expression]

(Optional) Display the specified entity. For example, enter the interface

(such as gigabitethernet0/1) into which a small form-factor pluggable (SFP)

module is installed.

(Optional) Display every entity in the device.

(Optional) Display begins with the line that matches the expression.

(Optional) Display excludes lines that match the expression.

(Optional) Display includes lines that match the specified expression.

Expression in the output to use as a reference point.

Modification

This command was introduced.

Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands

, SN: H11FS9R