Dot1X Max-Reauth-Req - Cisco Catalyst 3030 Command Reference Manual

Blade switch

Hide thumbs Also See for Catalyst 3030:

Table of Contents

dot1x max-reauth-req

Use the dot1x max-reauth-req interface configuration command to set the maximum number of times

that the switch restarts the authentication process before a port changes to the unauthorized state. Use

the no form of this command to return to the default setting.

Syntax Description

The default is 2 times.

Command Modes

Interface configuration

Command History

Usage Guidelines

You should change the default value of this command only to adjust for unusual circumstances such as

unreliable links or specific behavioral problems with certain clients and authentication servers.

This example shows how to set 4 as the number of times that the switch restarts the authentication

process before the port changes to the unauthorized state:

Switch(config-if)# dot1x max-reauth-req 4

You can verify your settings by entering the show dot1x [interface interface-id] privileged EXEC

Cisco Catalyst Blade Switch 3030 Command Reference

dot1x max-reauth-req count

no dot1x max-reauth-req

Number of times that the switch restarts the authentication process before the

port changes to the unauthorized state. The range is 0 to 10.

Modification

This command was introduced.

Cisco Catalyst Blade Switch 3030 Cisco IOS Commands