Trolling; Adjusting Trolling Speed; Stopping Engine; Procedure - Yamaha F75 Owner's Manual
Outboard motor
Hide thumbs
Also See for F75:
- Owner's manual (234 pages) ,
- Installation manual (224 pages) ,
- Maintenance manual (36 pages)
Table of Contents
Advertisement
Operation
2.
Move the gear shift lever quickly and firm-
ly from neutral to reverse.
Remote control models
Pull up the neutral interlock trigger (if
equipped) and move the remote control lever
quickly and firmly from neutral to reverse.
33
EMU30880
Trolling
EMU30890
Adjusting trolling speed
The trolling speed on outboard motors
equipped with the variable trolling RPM
switches can be adjusted approximately 50
r/min with each press of a switch.
1. "
" switch
2. "
" switch
To increase the trolling speed, press the "
switch.
To decrease the trolling speed, press the "
switch.
NOTE:
The trolling speed changes approximately
G
50 r/min each time a switch is pressed.
If the trolling speed has been adjusted, the
G
engine returns to the normal trolling speed
when the engine is stopped and restarted
or when the engine speed exceeds approx-
imately 3000 r/min.
EMU27820
Stopping engine
Before stopping the engine, first let it cool off
for a few minutes at idle or low speed. Stop-
ping the engine immediately after operating at
high speed is not recommended.
EMU27844
Procedure
1.
Push and hold the engine stop button or
turn the main switch to "
"
"
" (off).
Advertisement
Table of Contents
