hit counter script

Establish Security - Cisco uBR900 Series Configuring

Cable access routers
Hide thumbs Also See for uBR900 Series:
Table of Contents

Advertisement

Feature Overview
508148.568 CMAC_LOG_RNG_RSP_SID_ASSIGNED
508148.570 CMAC_LOG_ADJUST_RANGING_OFFSET
508148.572 CMAC_LOG_RANGING_OFFSET_SET_TO
508148.574 CMAC_LOG_ADJUST_TX_POWER
508148.576 CMAC_LOG_POWER_LEVEL_IS
508148.578 CMAC_LOG_STATE_CHANGE
508148.580 CMAC_LOG_RNG_REQ_QUEUED
508155.820 CMAC_LOG_RNG_REQ_TRANSMITTED
508155.824 CMAC_LOG_RNG_RSP_MSG_RCVD
508155.826 CMAC_LOG_ADJUST_RANGING_OFFSET
508155.826 CMAC_LOG_RANGING_OFFSET_SET_TO
508155.828 CMAC_LOG_RANGING_CONTINUE
508165.892 CMAC_LOG_RNG_REQ_TRANSMITTED
508165.894 CMAC_LOG_RNG_RSP_MSG_RCVD
508165.896 CMAC_LOG_ADJUST_TX_POWER
508165.898 CMAC_LOG_POWER_LEVEL_IS
508165.900 CMAC_LOG_RANGING_CONTINUE
508175.962 CMAC_LOG_RNG_REQ_TRANSMITTED
508175.964 CMAC_LOG_RNG_RSP_MSG_RCVD
508175.966 CMAC_LOG_RANGING_SUCCESS
Event 5—Establish IP Connectivity
After ranging is complete, the cable interface on the cable access router is UP. Now the cable access
router accesses a remote DHCP server to get an IP address. The DHCP server sends a response
containing the router's IP address plus the TFTP server's address, the Time of Day (TOD) server's
address, and the name of a configuration file containing additional configuration parameters. The
CMAC_LOG_DHCP_COMPLETE
508175.968 CMAC_LOG_STATE_CHANGE
508176.982 CMAC_LOG_DHCP_ASSIGNED_IP_ADDRESS
508176.984 CMAC_LOG_DHCP_TFTP_SERVER_ADDRESS
508176.986 CMAC_LOG_DHCP_TOD_SERVER_ADDRESS
508176.988 CMAC_LOG_DHCP_SET_GATEWAY_ADDRESS
508176.988 CMAC_LOG_DHCP_TZ_OFFSET
508176.990 CMAC_LOG_DHCP_CONFIG_FILE_NAME
508176.992 CMAC_LOG_DHCP_ERROR_ACQUIRING_SEC_SVR_ADDR
508176.996 CMAC_LOG_DHCP_COMPLETE
Event 6
The Cisco uBR900 series accesses the Time of Day server for the current date and time, which is
used to create time stamps for logged events. The
successful time of day sequence.
508177.120 CMAC_LOG_STATE_CHANGE
508177.126 CMAC_LOG_TOD_REQUEST_SENT
508177.154 CMAC_LOG_TOD_REPLY_RECEIVED
508177.158 CMAC_LOG_TOD_COMPLETE
Event 7
This event is currently bypassed by the Cisco uBR900 series because "full security" has not been
fully defined by DOCSIS and is therefore not yet supported.
508177.160 CMAC_LOG_STATE_CHANGE
508177.162 CMAC_LOG_SECURITY_BYPASSED
28
Cisco IOS Release 12.0(7)T
field shows that the IP connectivity was successful.
Establish the Time of Day

Establish Security

2
2408
12018
20
33.0
dBmV (commanded)
ranging_2_state
2
-64
11954
-9
31.0
dBmV (commanded)
dhcp_state
188.188.1.62
4.0.0.1
4.0.0.32
360
platinum.cm
CMAC_LOG_TOD_COMPLETE
establish_tod_state
3107617539
security_association_state
field indicates a

Advertisement

Table of Contents
loading

Table of Contents