Honeywell F58F Owner's Manual page 14

Electronic air cleaner

Hide thumbs Also See for F58F:

Table of Contents

Replacing electronic

air cleaner components

STEP 1

STEP 2

STEP 3

STEP 4

STEP 5

M3582

69-0764—2

Inspect the cells for broken ionizer wires and

bent collector plates. Repair as necessary or

take to a Honeywell Authorized Air Cleaner

Repair Station.

Slide the prefilters into the upstream prefilter

guides.

Slide the air cleaner cells in so the air flow

arrow points downstream and the handles face

outward.

Firmly close the access door.

Turn on the air cleaner. If the cells and prefilters

are wet, the neon light may not come on and

you may hear arcing. If the arcing is annoying,

simply turn the air cleaner off for 2-3 hours or

until the cells are dry.

If your air cleaner has an Air Cleaner Monitor,

the FAULT indicator may activate if you install

wet cells and prefilters. Again, if the neon light

or the FAULT indicator annoys you, simply turn

off the air cleaner for 2-3 hours or until the cells

and prefilters are dry.

Table of Contents