Panasonic Easa-Phone VA-208 Installation Manual page 48
Key telephone system
Hide thumbs
Also See for Easa-Phone VA-208:
- Operating instruction (45 pages) ,
- Operating instructions manual (45 pages)
Table of Contents
Advertisement
PBX OUYWARD
DIALING DIGITS
This feature setting is required to indicate the dialing number for outward dialing when COL 1 and/or COL 2 are designated
as PBX under the COL Setting-Type
Of COL.
0 The initial program
setting is for the PBX OUTWARD
DIALING on 9.
0 To change the program
setting, perform the following
steps:
Step 1
Step 2
Step 3
Step 4
4a.
4b.
4c.
4d.
Place the system in the programming
mode. See instructions
in General Operational
Procedures.
Place TEL Station
1 in the programming
mode by depressing
the SPKR button.
Dial the Feature
Program Activation
Code
13
p]
a
Activate
only one (1) of the following
options:
To set the PBX OUTWARD
DIALING
DIGIT
FOR " O" , depress COL 1, COL 2, SPKR and
REDIAL buttons, if on, to extinguish
the LED
lamps.
OR
To set the PBX OUTWARD DIALING DIGIT for
" ' I, depress
the COL 1, COL2, and SPKR
1
buttons, if on, to extinguish
the LED lamps. If
the REDIAL button is extinguished,
depress
the REDIAL button to light the LED lamp.
OR
To set the PBX OUTWARD DIALING DIGIT for
" 2" ,
depress the COL 1, COL 2 and REDIAL
buttons, if on, to extinguish
the LED lamps. If
the SPKR button is extinguished,
depress the
SPKR button to light the LED lamp.
Option
1
COL
I
)
COL 2
(
SPKR
1
REDIAL
2
1
' OFF
1
OFF
1
ON
1
OFF
OR
To set the PBX OUTWARD DIALING DIGIT for
" 3" ,
depress the COL 1 and COL 2 buttons,
if on, to extinguish the LED lamps. If the SPKR
and
REDIAL
buttons
are
extinguished,
depress the SPKR and REDIAL buttons to light
the LED lamps.
Option
1 COL I
1 COL 2
1
SPKR
1 REDIAL
3
1
OFF
1
OFF
1
ON
[
ON
OR
46
Advertisement
Chapters
Table of Contents
