Incoming Col Call Arriving Alarm - Panasonic Easa-Phone VA-208 Installation Manual
Key telephone system
Hide thumbs
Also See for Easa-Phone VA-208:
- Operating instruction (45 pages) ,
- Operating instructions manual (45 pages)
Table of Contents
Advertisement
COL SETTINGS
' TYPE OF LINE
Step 4
Activate
only one (1) of the following
options:
4a. To set the TYPE OF LINE for a Central Office line, depress the SPKR button, if
on, to extinguish
the LED lamp.
OR
4b.
To set the TYPE OF LINE for a PBX line, depress the SPKR button, if extinguished,
to light the LED associated
with the button.
Step 5
Depress the # button on the Dial Pad to store the program
established
in Step 4.
Option
I
SPKR
PBX
1
ON
Step 6
Proceed to next feature program or to end programming,
depress FLASH button and SPKR button in sequence.
INCOMING
COL CALL ARRIVING ALARM
This feature will generate an alarm sound at every Key Telephone when an incoming call on COL 1 and COL 2 is not answered
within the time frame set by the INCOMING
ALARM.
NOTE: Only one COL can be programmed
at a time. To change both COL 1 and COL 2, complete
Steps 1 thru 5 for COL
1
and then repeat Steps 3 thru 5 for COL 2.
0 The initial program
setting is for no alarm.
0 To change the program
setting, perform the following
steps:
Step 1
Step 2
Step 3
3a.
Step 4
4a.
4b.
Step 5
Step 6
Place the system in the programming
mode. See instructions
in the General Operational
Procedures.
Place TEL Station
1 in the programming
mode by depressing
the SPKR button.
Dial the appropriate
Feature
Program
Activation
Code for the COL to be programmed
For COL l-Dial
Feature
Program Activation
Code bl
' m
m
For CoL 2-Dial
Feature Program
Activation
Code I%] m
x
Activate
only one (1) of the following
options:
To set the INCOMING COL CALL ARRIVING ALARM, depress the REDIAL button,
if extinguished,
to light the INT LED lamp.
OR
To deactivate
the INCOMING COL CALL ARRIVING ALARM, depress the REDIAL
button, if on, to extinguish
the INT LED lamp.
Depress the # button on the Dial Pad to store the program
established
in Step 4.
Proceed to next feature program or to end programming,
depress FLASH button and SPKR
button
insequence.
34
Advertisement
Chapters
Table of Contents
