KEY TELEPHONE
SETTINGS
DOORPHONE
CALL
4c. To set the TEL Station to receive DOORPHONE
A and DOORPHONE
S CALL, depress COL 1 and COL 2 buttons, if extinguished,
to light
the LED lamps.
Option
j
COL
1
1
COL 2
DP NB
Conn.
ON
1
of4
OR
4d. To set the TE.L Station to not receive a DOORPHONE
CALL, depress
COL 1 and COL 2 buttons, if on, to extinguish
the LED lamps.
Option
1
COL
1
1
COL 2
DPAIB Not Corm
1
OFF
1
OFF
Step 5
Depress the # button on the Dial Pad to store the program
established
in Step 4.
Step 6
Proceed to next feature program or to end programming,
depress FLASH button and SPKR buttons in sequence.
INTERCOM CALL DURING CONVERSATION
This feature allows an intercom caller to signal a TEL Station which is already busy on an Intercom Call by superimposing
a continuous
tone. Each TEL Station must be individually
programmed
for INTERCOM CALL DURING CONVERSATION.
NOTE: Only one TEL Station can be programmed
at a time. To change
the INTERCOM
INCOMING
CALL DURING
CONVERSATION
on multiple TEL stations, complete
Steps 1 thru 5 for the first TEL Station and then repeat Steps
3 thru 5 for each remaining
TEL Station you wish to change.
l
The initial program setting is for all TEL Stations to have no INTERCOM INCOMING CALL DURING CONVERSATION.
0 To change the program
setting, perform the following
steps:
Step 1
Place the system in the programming
mode. See instructions
in the General Operational
Procedures.
Step 2
Place TEL Station 1 in the programming
mode by depressing
the SPKR button.
Step 3
Dial the Feature Program Activation
Code for the particular
TEL Station to be programmed.
For TEL Station l-Dial
Feature
Program
Activation
Code
m
fl
x
For TEL Station 2-Dial
Feature Program
Activation
Code
m
p]
E]
For TEL Station 3-Dial
Feature Program
Activation
Code
p]
131 d
For TEL Station 4-Dial
Feature Program
Activation
Code
m
k]
b]
For TEL Station S-Dial
Feature Program
Activation
Code
F]
E]
p]
For TEL Station 6-Dial
Feature
Program Activation
Code m
F]
]y]
For TEL Station 7-Dial
Feature Program
Activation
Code
q
m
k]
For TEL Station 8-Dial
Feature
Program Activation
Code p]
p]
k]
38