Assembling The Antenna - Cisco CB21AG Installation And Configuration Manual
Aironet 802.11a/b/g wireless lan client adapters
Hide thumbs
Also See for CB21AG:
- Installation and configuration manual (286 pages) ,
- Install wizard (34 pages) ,
- User manual (22 pages)
Table of Contents
Advertisement
Inserting a Client Adapter
Step 7
Press the card into the empty slot until its connector is firmly seated.
Caution
Do not force the card into the expansion slot; this could damage both the card and the slot. If the card
does not insert easily, remove it and reinsert it.
Reinstall the screw on the CPU back panel and replace the computer cover.
Step 8
Assembling the Antenna
Follow the steps below to assemble the PCI card's antenna.
Slide the antenna through the opening in the bottom of the antenna base.
Step 1
Position the antenna so its notches are facing the Cisco label on the front of the base. See
Step 2
Figure 3-13 Inserting the Antenna into Its Base
2
1
2
3
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
3-16
1
3
Antenna
Notch
Antenna base
Chapter 3
Installing the Client Adapter
Figure
OL-4211-02
3-13.
Advertisement
Table of Contents
Troubleshooting
