Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Zanussi F 902
Summary of Contents for Zanussi F 902
-
Page 1: Washing Machine
WASHING MACHINE F 902 - F 902 N USER MANUAL 132998360... - Page 2 Dear customer, Please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. Transport damages When unpacking the appliance, check that it is not damaged.
-
Page 3: Table Of Contents
Contents Warnings Maintenance Bodywork Disposal Detergent dispenser drawer Drain filter Tips for environmental protection 5 Water inlet filter Emergency emptying out Technical specifications Frost precautions Installation Something not working? 20-21 Unpacking Positioning Water inlet Water drainage Electrical connection Your new washing machine Description of the appliance Detergent dispenser drawer Control panel... -
Page 4: Warnings
Warnings The following warnings are provided in the interests of overall safety. You must read them carefully before installing or using the appliance. Installation • Leave the porthole door slightly ajar when the appliance is not in use. This preserves the door •... -
Page 5: Disposal
Child safety • Keep all detergents in a safe place out of children’s reach. • Children are often not aware of how dangerous • Make sure that children or pets do not climb into electrical appliances can be. When the machine is the drum. -
Page 6: Technical Specifications
Technical specifications F 902 F 902 N DIMENSIONS Height 85 cm 85 cm Width 60 cm 60 cm Depth 57 cm 45 cm MAXIMUM LOAD Cotton 6 kg 5 kg Synthetics 3 kg 2 kg Delicates 3 kg 2 kg... -
Page 7: Installation
Installation Unpacking Positioning Install the machine on a flat hard floor. All transit bolts and packing must be removed Make sure that air circulation around the machine is before using the appliance. not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen You are advised to keep all transit devices so that units. -
Page 8: Water Drainage
Water drainage Electrical connection This machine is designed to operate on a 220-230 V, The end of the drain hose can be positioned in three single-phase, 50 Hz supply. ways: Hooked over the edge of a sink using the plastic Check that your domestic electrical installation can hose guide supplied with the machine. -
Page 9: Your New Washing Machine
• The balance control device ensures the machine is stable during the spin. Description of the appliance 1 Detergent dispenser drawer F 902 F 902 N 2 Programme chart 3 Control panel 4 Door handle 5 Drain filter... -
Page 10: Use
Control panel 1 Programme chart 5 Quick wash button It will help you to choose the most suitable washing By depressing this button on cotton programme B programme for your laundry. and synthetic programme F the washing time will be reduced by approx. -
Page 11: Washing Hints
Washing hints Laundry weights The following weights are indicative: Sorting the laundry bathrobe 1200 g Follow the wash code symbols on each garment napkin 100 g label and the manufacturer’s washing instructions. quilt cover 700 g Sort the laundry as follows: sheet 500 g whites, coloureds, synthetics, delicates, woollens. -
Page 12: Detergents And Additives
Red wine: soak in water and detergent, rinse and Quantity of detergent to be used treat with acetic or citric acid, then rinse. Treat any The type and quantity of detergent will depend on residual marks with bleach. the type of fabric, load size, degree of soiling and Ink: depending on the type of ink, moisten the fabric hardness of the water used. -
Page 13: International Wash Code Symbols
International wash code symbols These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. Energetic wash Max. wash Max. wash Max. wash Max. wash temperature temperature temperature temperature 95°C 60°C 40°C 30°C Hand wash Do not... -
Page 14: Operating Sequence
«MAX» mark. Before washing your first load of laundry, we F 902 F 902 N recommend that you run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. -
Page 15: At The End Of The Programme
8. At the end of the programme The machine stops automatically. If you have selected a programme which ends with the water of the last rinse left in the tub, drain the water before opening the door. Select programme “L” (drain) or “G” (short spin). Wait one or two minutes before opening the door to give the electric locking mechanism time to release Depress the ON/OFF button... -
Page 16: Washing Programmes
Long spin The consumption figures indicated on the energy label refer to the 60°C wash programme for cotton (programme “B”) with a wash load of 5 kg for model F 902 and 4.5 kg for model F 902 N. Important! •... - Page 17 Programme table Washing programmes for synthetics, mixed fabrics, delicates and wool Max load: 3 kg, wool 2 kg (F 902), 2 kg, wool 1 kg (F 902 N) Programme Temp. Fabrics Additional functions SYNTHETICS WITHOUT PREWASH, 30°-60° for example underwear, coloured items, shirts, blouses, mixed fabrics 30°...
-
Page 18: Maintenance
Clean the filter under a running tap, then refit it, F 902 screwing it fully in. F 902 N 4. Water inlet filter If you notice that the machine is taking longer to fill, check that the filter in the water inlet hose is not blocked. -
Page 19: Emergency Emptying Out
5. Emergency emptying out If the water is not discharged (outlet pump is blocked, filter or drain hose are clogged), proceed as follows to empty out the machine: • pull out the plug from the power socket; • close the water tap; •... -
Page 20: Something Not Working
Something not working? Problems which you can resolve yourself. Problem Possible cause • The machine does not start up: • The door is not firmly closed. • The machine is not plugged in or there is no power at the socket. •... -
Page 21: Machine Does Not Spin
Problem Possible cause • Spinning starts late or the • The electronic unbalance detection device has cut in because the laundry is not evenly distributed in machine does not spin: the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning can resume.