Related Manuals for Zanussi FE 1026 N
Summary of Contents for Zanussi FE 1026 N
-
Page 1: Washing Machine
WASHING MACHINE TVÄTTMASKIN PYYKINPESUKONE STIRALWNAÅ MAfiINA FE 1026 N INSTRUCTION BOOKLET BRUKSANVISNING KÄYTTÖOHJE 132988310 RUKOVODSTVO PO ÈKSPLUATACII... -
Page 2: Table Of Contents
Dear customer, Transport damages Please read these operating instructions carefully When unpacking the appliance, check that it is not and pay particular attention to the safety notes damaged. If in doubt, do not use it and contact the indicated in the first pages. We recommend that you Service Centre. -
Page 3: Warnings
Warnings The following warnings are provided in the interests of overall safety. You must read them carefully before installing or using the appliance. Installation General safety • All internal packing must be removed before using • Repairs to the machine must be carried out only by the appliance. -
Page 4: Disposal
Disposal Packaging materials Machine The materials marked with the symbol Use authorised disposal sites for your old appliance. recyclable. Help to keep your country tidy! >PE<=polyethylene >PS<=polystyrene >PP<=polypropylene This means that they can be recycled by disposing of them properly in appropriate collection containers. Tips for environmental protection To save water, energy and to help protect the •... -
Page 5: Installation
Installation Unpacking 7. Plug all the holes with the plugs which you will find in the envelope containing the instruction booklet. All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. -
Page 6: Water Drainage
The other end of the inlet hose which connects to the The drain hose must not be kinked. machine can be turned in any direction. Simply loosen the fitting, rotate the hose and retighten the fitting, making sure there are no water leaks For a correct functioning of the machine the drain hose must remain hooked on the proper support piece situated on the top part of the back... -
Page 7: Your New Washing Machine
Your new washing machine This new machine meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. • The automatic cooling of the washing water from 90° to 60°C before draining will prevent old drain pipes from being deformed. -
Page 8: Use
Control panel Maximum temperatures are 90°C for cotton, 60°C for 1 ON/OFF button synthetic fabrics, 40°C for delicate fabrics, wool and Press this button to switch the washing machine on. fabrics to be hand-washed (HAND WASH programme). Press the ON/OFF button again to switch the Position corresponds to cold wash. -
Page 9: Options Button
fabrics. If this option is selected for cotton • Drain or Spin programmes, the spin speed automaticaly will Press SKIP/RESET button onxce, all the leds are off, the reduce to 900 rpm. display will show three blinking dashes, then press The SUPER RINSE and the EASY IRON options button in order to select the desired programme. -
Page 10: Skip/Reset Button
Important! The first time you use the washing machine, 9 START/PAUSE button when you switch it on, it may display a blinking zero and This button has two functions: give an audible warning signal. This is due to the fact that the washing machine has performed a washing •... - Page 11 Example: 11 DELAY button In this case, the spin (at This button makes it possible to delay the starting of the speed provided for the programme from 30 min-60 min-90 min, 2 hours the selected type of and then by 1 hour up to maximum of 23 hours. The fabric) will be delay you have selected is shown on the display for performed.
-
Page 12: Washing Hints
Laundry weights Washing hints The following weights are indicative: bathrobe 1200 g Sorting the laundry napkin 100 g Follow the wash code symbols on each garment quilt cover 700 g label and the manufacturer’s washing instructions. sheet 500 g Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. -
Page 13: Detergents And Additives
Ink: depending on the type of ink, moisten the fabric Quantity of detergent to be used first with acetone (*), then with acetic acid; treat any The type and quantity of detergent will depend on residual marks on white fabrics with bleach and then the type of fabric, load size, degree of soiling and rinse thoroughly. -
Page 14: International Wash Code Symbols
International wash code symbols These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. Energetic wash Max. wash Max. wash Max. wash Max. wash temperature temperature temperature temperature 95°C 60°C 40°C 30°C Hand wash Do not... -
Page 15: Operating Sequence
4. Switch the machine on Operating sequence Press the ON/OFF button to switch the machine on. The display will show three blinking dashes or a Before the first wash we recommend that you pour 2 blinking zero. The light above the button will light up. litres of water into the main wash compartment of the detergent drawer in order to activate the ECO valve. -
Page 16: Select The Desired Options
10. Start the programme 7. Select the spin speed or the RINSE Press the START/PAUSE button . The relevant HOLD option light will stop flashing and only the light relevant to Press the SPIN SPEED button repeatedly, in the phase that is in progress will remain lit. order to select the desired spin speed or the RINSE If you have chosen a delayed start, the washing HOLD option... - Page 17 13. How to open the door during the Note: when you switch the machine on, if you must erase the previously performed programme, it is also cycle of a programme sufficient to press the FABRIC button and select You can open the door, after having set the washing a new programme.
-
Page 18: Washing Programmes
Washing programmes Type of Consumption* Programme/ Description of laundry and Available options temperature programme Energy symbols on load Water Time labels litres h/min. Main wash at Cottons 60°-90°C 60°-90°C White cotton: 2.25 4 kg 3 rinses e.g. sheets, Long spin tablecloths, household linen... -
Page 19: Maintenance
Maintenance 1. Door seal Detergent can also accumulate inside the drawer recess: clean it with an old toothbrush. Refit the Check from time to time the door seal and eliminate drawer after cleaning. eventual possible objects that could be trapped in the fold. -
Page 20: Water Inlet Filter
• Remove any objects from the pump impeller by Emergency emptying out rotating it. If the water is not discharged, proceed as follows to empty out the machine: • pull out the plug from the power socket; • close the water tap; •... -
Page 21: Something Not Working
Something not working? Problems which you can resolve yourself. During machine operation it is possible that one of the following alarm codes appears on the display: - E10: problem with the water supply - E20: problem with water draining - E40: door open At the same time the buzzer sounds. -
Page 22: The Door Will Not Open
Problem Possible cause • The door will not open: • The water level is above the bottom edge of the door. • The machine is heating the water. • The drum is turning. • Spinning starts late or the • The electronic unbalance detection device has cut in because the laundry is not evenly distributed in laundry is not spun enough: the drum. - Page 23 From t Made in EEC...