132988070gb.qxd 01/06/2004 17.40 Pagina Dear customer, Transport damages Please read these operating instructions carefully When unpacking the appliance, check that it is not and pay particular attention to the safety notes damaged. If in doubt, do not use it and contact the indicated in the first pages.
132988070gb.qxd 01/06/2004 17.40 Pagina Warnings The following warnings are provided in the interests of overall safety. You must read them carefully before installing or using the appliance. Installation General safety • All internal packing must be removed before using • Repairs to the machine must be carried out only by the appliance.
132988070gb.qxd 01/06/2004 17.40 Pagina Disposal Packaging materials Machine The materials marked with the symbol Use authorised disposal sites for your old appliance. recyclable. Help to keep your country tidy! >PE<=polyethylene >PS<=polystyrene >PP<=polypropylene This means that they can be recycled by disposing of them properly in appropriate collection containers.
132988070gb.qxd 01/06/2004 17.40 Pagina Installation Unpacking 7. Plug all the holes with the plugs which you will find in the envelope containing the instruction booklet. All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.
132988070gb.qxd 01/06/2004 17.40 Pagina The other end of the inlet hose which connects to the The drain hose must not be kinked. machine can be turned in any direction. Simply loosen the fitting, rotate the hose and retighten the fitting, making sure there are no water leaks For a correct functioning of the machine the drain hose must remain hooked on the proper support piece situated on the top part of the back...
132988070gb.qxd 01/06/2004 17.40 Pagina Your new washing machine This new machine meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. • The automatic cooling of the washing water from 95° to 60°C before draining will prevent old drain pipes from being deformed.
132988070gb.qxd 01/06/2004 17.40 Pagina Control panel for synthetic fabrics, 40°C for delicate fabrics, wool and 1 ON/OFF button fabrics to be hand-washed (HAND WASH programme). Press this button to switch the washing machine on. Position corresponds to cold wash. Press the ON/OFF button again to switch the Important! machine off.
132988070gb.qxd 01/06/2004 17.40 Pagina The PREWASH, NIGHT CYCLE and QUICK WASH display will show three blinking dashes, then press options cannot be selected together. button in order to select the desired programme. If you : this option can be selected wish to drain or spin press the SKIP/RESET...
132988070gb.qxd 01/06/2004 17.40 Pagina the tub, at the end of a programme with the The incorrect selection is also indicated by an RINSE HOLD or NIGHT CYCLE option: audible warning signal. this is indicated by a flashing zero. • An alarm code indicates a fault in the machine •...
Page 11
132988070gb.qxd 01/06/2004 17.40 Pagina In this case, the spin (at about 3 seconds; afterwards, the duration of the the speed provided for programme reappears. the selected type of You must select this option after you have set the fabric) will be programme and before you press the performed.
132988070gb.qxd 01/06/2004 17.40 Pagina Laundry weights Washing hints The following weights are indicative: bathrobe 1200 g Sorting the laundry napkin 100 g Follow the wash code symbols on each garment quilt cover 700 g label and the manufacturer’s washing instructions. sheet 500 g Sort the laundry as follows:...
132988070gb.qxd 01/06/2004 17.40 Pagina Ink: depending on the type of ink, moisten the fabric Quantity of detergent to be used first with acetone (*), then with acetic acid; treat any The type and quantity of detergent will depend on residual marks on white fabrics with bleach and then the type of fabric, load size, degree of soiling and rinse thoroughly.
132988070gb.qxd 01/06/2004 17.40 Pagina International wash code symbols These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. Energetic wash Max. wash Max. wash Max. wash Max. wash temperature temperature temperature temperature 95°C 60°C...
132988070gb.qxd 01/06/2004 17.41 Pagina 4. Switch the machine on Operating sequence Press the ON/OFF button to switch the machine on. The display will show three blinking dashes or a Before the first wash we recommend that you pour 2 blinking zero. The light above the button will light up. litres of water into the main wash compartment of the detergent drawer in order to activate the ECO valve.
Page 16
132988070gb.qxd 01/06/2004 17.41 Pagina 10. Start the programme 7. Select the spin speed or the RINSE Press the START/PAUSE button . The relevant HOLD option light will stop flashing and only the light relevant to Press the SPIN SPEED button repeatedly, in the phase that is in progress will remain lit.
Page 17
132988070gb.qxd 01/06/2004 17.41 Pagina 13. How to open the door during the Note: when you switch the machine on, if you must erase the previously performed programme, it is also cycle of a programme sufficient to press the FABRIC button and select a You can open the door, after having set the washing new programme.
132988070gb.qxd 01/06/2004 17.41 Pagina Washing programmes Type of Consumption* Programme/ Description of laundry and Available options temperature programme Energy load symbols on Time Water labels litres h/min. Main wash at Cottons 60°-95°C 60°-95°C White cotton: 2.25 5 kg 3 rinses e.g.
132988070gb.qxd 01/06/2004 17.41 Pagina Maintenance 1. Door seal Detergent can also accumulate inside the drawer recess: clean it with an old toothbrush. Refit the Check from time to time the door seal and eliminate drawer after cleaning. eventual possible objects that could be trapped in the fold.
132988070gb.qxd 01/06/2004 17.41 Pagina • Remove any objects from the pump impeller by Emergency emptying out rotating it. If the water is not discharged, proceed as follows to empty out the machine: • pull out the plug from the power socket; •...
132988070gb.qxd 01/06/2004 17.41 Pagina Something not working? Problems which you can resolve yourself. During machine operation it is possible that one of the following alarm codes appears on the display: - E10: problem with the water supply - E20: problem with water draining - E40: door open At the same time the buzzer sounds.
132988070gb.qxd 01/06/2004 17.41 Pagina Problem Possible cause • The door will not open: • The water level is above the bottom edge of the door. • The machine is heating the water. • The drum is turning. • Spinning starts late or the •...
Page 23
132988070•rus.qxd 1-06-2004 15:07 Pagina 90 From t Made in EEC...