Table of Contents
Advertisement
Dimmer switch "
/
"
Set this switch to "
" for the high
beam and to "
" for the low beam.
Turn signal switch "
/
To signal a right-hand turn, push this
switch to "
". To signal a left-hand
turn, push this switch to "
leased, the switch returns to the center
position.
Since this model is equipped with a
self-canceling system, the turn signal
lights will self-cancel after the vehicle
has traveled both about 150 m (490 ft)
and for approximately 15 seconds.
However, the turn signal lights can also
be canceled manually by pushing the
switch in after it has returned to the cen-
ter position.
NOTE:
The self-canceling system only oper-
ates when the vehicle is moving, so that
the turn signal lights will not self-cancel
while you are stopped at an intersec-
tion.
INSTRUMENT AND CONTROL FUNCTIONS
EAU12400
Horn switch "
Press this switch to sound the horn.
Engine stop switch "
EAU12430
"
Set this switch to "
the engine. Set this switch to "
stop the engine in case of an emergen-
". When re-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
Start switch "
Push this switch to crank the engine
with the starter.
CAUTION:
See page 5-1 for starting instruc-
tions prior to starting the engine.
EAU12500
"
Clutch lever
EAU12660
/
"
" before starting
" to
EAU12710
1. Clutch lever
"
The clutch lever is located at the left
handlebar grip. To disengage the
ECA10050
clutch, pull the lever toward the handle-
bar grip. To engage the clutch, release
the lever. The lever should be pulled
rapidly and released slowly for smooth
clutch operation.
The clutch lever is equipped with a
clutch switch, which is part of the igni-
tion circuit cut-off system. (See page
3-16.)
3-5
EAU12820
3
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
