Table of Contents
Advertisement
INSTRUMENT AND CONTROL FUNCTIONS
Indicator and warning lights
3
1. Fuel level warning light "
2. High beam indicator light "
3. Turn signal indicator light "
4. Neutral indicator light "
5. Engine trouble warning light "
Turn signal indicator light "
This indicator light flashes when the
turn signal switch is pushed to the left or
right.
Neutral indicator light "
This indicator light comes on when the
transmission is in the neutral position.
EAU11001
High beam indicator light "
This indicator light comes on when the
high beam of the headlight is switched
on.
Fuel level warning light " "
This warning light comes on when the
fuel level drops below approximately
3.5 L (0.92 US gal) (0.77 Imp.gal).
When this occurs, turn the fuel cock le-
ver to the "RES" position and refuel as
"
"
soon as possible.
"
"
Engine trouble warning light "
"
This warning light comes on or flashes
when an electrical circuit monitoring the
EAU11020
"
engine is defective. When this occurs,
have a Yamaha dealer check the self-
diagnosis system.
The electrical circuit of the warning light
can be checked by turning the key to
EAU11060
"ON". If the warning light does not come
"
on for a few seconds, then go off, have
a Yamaha dealer check the electrical
circuit.
EAU11080
"
Speedometer unit
EAU11270
1. Odometer/tripmeter/clock
2. Speedometer
3. Fuel gauge
4. Set button
EAU11500
"
5. Mode button
The speedometer unit is equipped with
a speedometer, an odometer and two
tripmeters. The speedometer shows
riding speed. The odometer shows the
total distance traveled. The tripmeters
show the distance traveled since they
were last set to zero.
Pushing the mode button (left) switches
the display between the odometer
mode "ODO" and the tripmeter modes
"TRIP A" and "TRIP B" in the following
order:
ODO → TRIP A → TRIP B → ODO
3-2
EAU11701
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
