Table of Contents
Advertisement
INSTRUMENT AND CONTROL FUNCTIONS
Locking the steering with a
padlock
3
In addition to the main switch/steering
lock, there are brackets on the right
side of the steering head pipe for lock-
ing the steering with a padlock. To do
so, turn the handlebar until the holes in
the two brackets are aligned, and then
lock the steering with a suitable pad-
lock.
EAU13780
Rider seat
To remove the rider seat
1. Insert the key into the main switch,
and then turn it counterclockwise
to "OPEN".
NOTE:
Do not push inward when turning the
key.
2. Pull the rider seat off.
To install the rider seat
1. Insert the projection on the rear of
the rider seat into the seat holder
as shown, and then push the front
of the seat down to lock it in place.
3-10
EAU14151
1. Projection
2. Seat holder
2. Remove the key from the main
switch if the motorcycle will be left
unattended.
NOTE:
Make sure that the rider seat is properly
secured before riding.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
