hit counter script

Technical Specifications; Installation; Positioning - Zanussi ZT 56 Instruction Booklet

Hide thumbs Also See for ZT 56:
Table of Contents

Advertisement

Technical specifications

DIMENSIONS
POWER SUPPLY VOLTAGE AND FREQUENCY
TOTAL POWER ABSORBED
AVERAGE DAILY UNITS ELECTRICITY(*)
GROSS CAPACITY
STAR RATING
(*)This figure is based on standard test results in accordance with European Standard EN153. Actual
consumption will depend on how the appliance is used and where it is located).

Installation

Positioning

For this appliance to work efficiently, it should be
located away from heat sources, e.g. cookers,
radiators, boilers, direct sunlight etc. This also
includes locations or rooms where the ambient
temperature reaches above 32 degrees C or drops
below 10 degrees (e.g. conservatories).
You should also ensure that air can circulate freely
around the back and the top of the cabinet. There
must also be a minimum distance beween the top of
the cabinet and any overhanging kitchen furniture as
shown in the figure.
Do not obstruct the space underneath. The back of the
cabinet may be placed close to the wall but must not
touch it. DO NOT install in places with restricted
ventilation.
Adjust the level of the appliance by screwing out the
adjustable foot, or feet, at the bottom of the cabinet
using your fingers or a spanner.
Height
Width
Depth
220-240 V / 50 Hz
110 W
0,90 kWh
160 l
Fridge
126 l
A
NP006
D200
13
85
cm
54,5
cm
60
cm
B

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zt 2 rZt 56/2 r

Table of Contents