CONTENTS Instructions for the User Instructions for the Installer Important Safety Instructions Technical specifications Description of the Appliance Installation Positioning Operation Door reversal Before use Setting the temperature Electrical Connection - star compartment Frozen food storage Thawing Making ice cubes Normal operating sounds Fresh food refrigeration Health and...
Contact your local There is a risk of suffocation! Keep packaging Zanussi Service Force Centre. material away from children! At the end of the Appliance Life During Use...
DESCRIPTION OF THE APPLIANCE Dairy compartment Can storage shelf with egg tray Bottle storage shelf Salad drawers Glass shelf (for storing fresh meat) Storage shelves (one with flap) Thermostat control Freezer compartment Conveyor OPERATION Before use Remove all securing tapes. Wash inside the appli- When altering the temperature setting, allow 24 ance with lukewarm water and bicarbonate of soda hours for the temperature to stablise before making...
Important The temperature inside the refrigerator and -star compartment can be regulated by adjusting the conveyor located under the star compartment. To obtain a lower temperature in the -star compartment when frozen food is stored inside and when the ambient temperature is 25°C or lower slightly raise the conveyor (A) and push it all the way in.
Thawing Fresh food refrigeration Food can be thawed in a number of ways, depend- To obtain the best performance, do not store warm ing on the type of food and the size of the packs. food or evaporating liquids in the refrigerator; do Meat, fish and fruit should be thawed in the refriger- cover or wrap the food, particularly if it has a strong ation compartment and small pieces of meat can...
HEALTH AND SAFETY GUIDELINES Because of consumer demand, preservatives have been removed from many pre-prepared foods. This together with the changes in shopping habits to a once-a-week shop, mean that safe handling and storage of food is even more important than ever. The following tips should help you to ensure that the food in your home is in as perfect condition as possible.
DEFROSTING While in operation the -star compartment becomes progressively covered with frost. This frost, which acts as an insulator and thus pre- vents the cold from reaching the food should be removed whenever the thickness of the frost exceeds 1/4". To carry out complete defrosting proceed as follows: 1.
Replace the bulb as follows: 1. Remove conveyor 2. Unscrew light bulb 3. Replace with a 12 watt bulb available from your nearest Zanussi Service Force Centre. 4. Replace conveyor D359 When the appliance is not in use When the appliance is not in use for long periods, dis-...
SOMETHING NOT WORKING? Before contacting your local Service Force Centre check the following points. IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee. Symptom Solution No power to appliance...
Customer Care Book. 5. The purchase date CUSTOMER CARE DEPARTMENT For general enquiries concerning your Zanussi appliance or for further information on Zanussi products, you are invited to contact our Customer Care Department by letter or telephone as follows: Customer Care Department...
Standard guarantee conditions We, Zanussi Limited, undertake that if within 12 months of the date of purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
TECHNICAL SPECIFICATIONS DIMENSIONS Height Width 49,5 Depth POWER SUPPLY VOLTAGE AND FREQUENCY 220-240 V / 50 Hz TOTAL POWER ABSORBED 90 W AVERAGE DAILY UNITS ELECTRICITY 0,74 kWh GROSS CAPACITY Fridge/Freezer 140 l NET CAPACITY Fridge/Freezer 118 l STAR RATING INSTALLATION Positioning For this appliance to work efficiently, it must not be...
Door Reversal Before carrying out the operations described below, pull out the mains plug from the wall socket. To carry out this reversal go through the following steps: 1. Gently lay the appliance on its back with the top held away from the floor by 5-8 cm (2-3 inches) of packing.
The cover/carrier is indicated by the coloured insert at the base of the plug. A replacement cover/carrier must be obtained from your local Zanussi Service Force Centre whose address is listed in the Customer Care Booklet which accompanies your instruction manual.