MAINTENANCE AND CLEANING
Before any maintenance or cleaning work is carried
out, DISCONNECT the appliance from the ELEC-
TRICITY supply.
Internal cleaning
Clean the inside and accessories with warm water
and bicarbonate of soda (5ml to 0.5 litre of water).
Rinse and dry thoroughly.
NEVER USE DETERGENTS, ABRASIVE POW-
DERS, HIGHLY PERFUMED CLEANING PROD-
UCTS OR WAX POLISHES, TO CLEAN THE INTERI-
OR AS THESE WILL DAMAGE THE SURFACE AND
LEAVE A STRONG SMELL.
External cleaning
Wash the outer cabinet with warm soapy water. Do
NOT use abrasive products.
Once or twice a year dust the condenser (black grill)
and the compressor at the back of the appliance, with
a brush or vacuum cleaner, see figure.
You MUST ensure that the appliance is switched OFF.
An accumulation of dust will affect the performance of
the appliance and cause excessive electricity con-
sumption.
Changing the light bulb
Should the interior light fail to work, switch off and dis-
connect the appliance from the electricity supply.
Replace the bulb as follows:
1. Remove conveyor
2. Unscrew light bulb
3. Replace with a 12 watt bulb available from your
nearest Zanussi Service Force Centre.
4. Replace conveyor
When the appliance is not in use
When the appliance is not in use for long periods, dis-
connect from the electricity supply, empty all foods
and clean the appliance, leaving the door ajar to pre-
vent unpleasant smells.
D358
D359
9
CONDENSER
COMPRESSOR