Table of Contents
Advertisement
8
Operating instructions
• the hob gets too hot (e.g. when a saucepan boils dry). Before you use the hob again, the
cooking zone must be cool.
• you use incorrect cookware.
automatically.
• you do not stop a cooking zone or change the heat setting. After some time
on and the hob stops. See the table.
Automatic Switch Off times
Heat setting
Stops after
The heat setting
Touch the control bar at the necessary heat set-
ting. Change to the left or the right, if it is neces-
sary. Do not release before you have a correct heat
setting. The display shows the heat setting.
Automatic Heat Up
You can get a necessary heat setting in a shorter time if you activate the Automatic Heat
Up function. This function sets the highest heat setting for some time (see the graphic),
and then decreases to the necessary heat setting.
To start the Automatic Heat Up function for a cooking zone:
1. Touch
2. Immediately touche the necessary heat setting. After 3 seconds
display.
To stop the function change the heat setting.
Switching on and off the power function
The power function gives more power to an induction cooking zone for no longer than 10
minutes. After that time, the induction cooking zone automatically sets back to
start it , touch
-
6 hours
12
11
10
9
8
7
6
5
4
3
2
1
0
1
2 3 4 5 6 7 8 9 10 11 12 13 14
(
comes on in the display).
and
comes on. To stop it, set a heat setting between
comes on and after 2 minutes the cooking zone stops
-
5 hours
-
4 hours
1.5 hours
comes on in the
and
comes
-
P
. To
.
Advertisement
Table of Contents
