Table of Contents
Advertisement
Configuring Country Codes
Command or Action
Step 15
ap country country_code
Example:
Switch# ap country IN
Step 16
end
Example:
Switch(config)# end
Step 17
ap name Cisco_AP no shutdown
Example:
Switch# ap name AP02 no shutdown
Configuration Examples for Configuring Country Codes
Displaying Channel List for Country Codes: Example
This example shows how to display the list of available channels for the country codes configured on your
switch:
Switch# show wireless country channels
Configured Country........................: US - United States
KEY: * = Channel is legal in this country and may be configured manually.
A = Channel is the Auto-RF default in this country.
. = Channel is not legal in this country.
C = Channel has been configured for use by Auto-RF.
x = Channel is available to be configured for use by Auto-RF.
(-,-) = (indoor, outdoor) regulatory domain allowed by this country.
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-
802.11bg :
Channels : 1 1 1 1 1
: 1 2 3 4 5 6 7 8 9 0 1 2 3 4
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-
(-A ,-AB ) US : A * * * * A * * * * A . . .
Auto-RF : . . . . . . . . . . . . . .
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
802.11a : 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Channels : 3 3 3 4 4 4 4 4 5 5 6 6 0 0 0 1 1 2 2 2 3 3 4 4 5 5 6 6
: 4 6 8 0 2 4 6 8 2 6 0 4 0 4 8 2 6 0 4 8 2 6 0 9 3 7 1 5
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
(-A ,-AB ) US : . A . A . A . A A A A A * * * * * . . . * * * A A A A
*
Auto-RF : . . . . . . . . . . . . . . . . . . . . . . . . . . . .
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
OL-28697-01
Lightweight Access Point Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
Configuration Examples for Configuring Country Codes
Purpose
Assigns an access point to a specific country.
Ensure that the country code that you choose is
Note
compatible with the regulatory domain of at least one
of the access point's radios.
Note
If you enabled the networks and disabled some access
points and then enter the ap country country_code
command, the specified country code is configured on
only the disabled access points. All other access points
are ignored.
Returns to privileged EXEC mode. Alternatively, you can also
press Ctrl-Z to exit global configuration mode.
Enables the access point.
79
Advertisement
Table of Contents
