Cisco CVR100W Administration Manual page 139
Wireless-n vpn router
Hide thumbs
Also See for CVR100W:
- Administration manual (131 pages) ,
- Quick start manual (9 pages) ,
- Quick start manual (9 pages)
Table of Contents
Advertisement
Using Cisco Simple Connect
About Cisco Simple Connect
Cisco CVR100W Wireless-N VPN Router Administration Guide
•
The VLAN to which the CSC wireless access point is mapped cannot be
the same as the VLANs of other SSIDs. You must assign a different VLAN to
the CSC wireless access point.
•
When enabling Cisco Simple Connect on a SSID, the current settings of this
SSID are automatically saved before the CSC settings are applied, and then
are restored after CSC is disabled on this SSID.
•
When disabling Cisco Simple Connect on a SSID, the CSC settings on this
SSID are automatically saved before the previous saved settings of this
SSID are restored, and are restored after CSC is enabled again.
•
By default, the CSC wireless access point is automatically named as Cisco-
Simple-Connect after you enable Cisco Simple Connect for the first time.
The wireless security mode, SSID broadcast, and SSID Isolation are
disabled on the CSC wireless access point. For security purposes, we
strongly recommend that you configure the CSC wireless access point with
the highest level of security that is supported by the devices into your
wireless network.
•
The wireless clients that are associated with the CSC wireless access
point can only access the Internet. They cannot manage and configure the
CVR100W through web-based Configuration Utility and access the
CVR100W's local network resources.
•
The CVR100W provides you with a unique token key and displays the time
that you can access the Internet after you run the CSC client application on
a smart phone or panel computer that supports the Android or iOS
operating system to interact with the CSC card. The token key is used for
the smart devices that do not support the Android or iOS operating system
or do not install the CSC client application or the PCs or laptops to access
the Internet after they are associated with the CSC wireless network.
•
The administrator can limit the time to access the Internet for all wireless
clients that are associated with the CSC wireless network. When the online
time of the CSC wireless client exceeds the limitation, the wireless
connection is automatically terminated.
9
137
- Quick Links:
- Lan Ethernet Interface
Hide quick links:
Advertisement
Table of Contents
