Cisco CVR100W Administration Manual page 108
Wireless-n vpn router
Hide thumbs
Also See for CVR100W:
- Administration manual (131 pages) ,
- Quick start manual (9 pages) ,
- Quick start manual (9 pages)
Table of Contents
Advertisement
Configuring VPN
Configuring Advanced VPN Setup
Cisco CVR100W Wireless-N VPN Router Administration Guide
Local ID
Remote ID
Encryption
Algorithm
Authentication
Algorithm
Pre-Shared Key
Diffie-Hellman (DH)
Group
SA-Lifetime
Dead Peer
Detection
Choose how to specify your local gateway ID.
•
Click Auto to automatically to obtain the local
gateway ID.
•
Click Manual to enter the IP address or the fully
qualified domain name (FQDN) of the local
gateway ID.
Choose how to specify the remote gateway ID.
•
Click Auto to automatically to obtain the remote
gateway ID.
•
Click Manual to enter the IP address or the fully
qualified domain name (FQDN) of the remote
gateway ID.
Choose the algorithm used to negotiate the Security
Association (SA): DES, 3DES, AES-128, AES-192, or
AES-256.
Specify the authentication algorithm for the VPN
header: MD5, SHA-1, or SHA2-256. Ensure that the
authentication algorithm is configured identically on
both sides of the VPN tunnel (for example, the
CVR100W and the router to which it is connecting).
Enter the key in the space provided. Note that the
double-quote character (") is not supported in the key.
Specify the DH Group algorithm, which is used when
exchanging keys. The DH Group sets the strength of
the algorithm in bits. Ensure that the DH Group is
configured identically on both sides of the IKE policy.
Enter the interval, in seconds, after which the Security
Association (SA) becomes invalid.
Check Enable to enable this feature, or uncheck to
disable it. Dead Peer Detection (DPD) detects whether
the peer is alive or not. If the peer is detected as dead,
the router deletes the IPsec and IKE Security
Association.
6
106
- Quick Links:
- Lan Ethernet Interface
Hide quick links:
Advertisement
Table of Contents
