Cisco Aironet Wireless LAN Client Installation And Configuration Manual page 67
Wireless lan client adapters, guide for ms-dos
Hide thumbs
Also See for Cisco Aironet Wireless LAN Client:
- Installation and configuration manual (290 pages) ,
- Quick start manual (12 pages) ,
- Getting started manual (38 pages)
Table of Contents
Advertisement
Appendix A
Technical Specifications
Table A-1
Power output
340 PC card
340 LM card
340 PCI client adapter
350 PC and LM card
350 PCI client adapter
Operating frequency
Usable channels
Interference rejection
Data rates
Modulation
Receiver sensitivity
340 series adapters
Receiver sensitivity
350 series adapters
OL-1744-02
Technical Specifications for the Cisco Aironet Wireless LAN Client Adapters (continued)
30 mW (15 dBm)
1 mW (0 dBm)
30 mW (15 dBm) (0.5 mW/MHz)
5 mW (7 dBm) (0.5 mW/MHz)
30 mW (15 dBm)
15 mW (11 dBm)
5 mW (7 dBm)
1 mW (0 dBm)
Note
30 mW is the maximum power level
supported by 340 series adapters.
See page B-3 for limitations on radiated
Note
power (EIRP) levels in the European
community and other countries.
100 mW (20 dBm)
50 mW (17 dBm)
30 mW (15 dBm)
20 mW (13 dBm)
5 mW (7 dBm)
1 mW (0 dBm)
100 mW (20 dBM)
50 mW (17 dBM)
30 mW (15 dBM)
20 mW (13 dBm)
1 mW (0 dBm)
2.4 to 2.497 GHz (depending on the regulatory
domain in which the client adapter is used)
2412 to 2484 MHz in 5-MHz increments
–35 dBc adjacent channel rejection
1, 2, 5.5, and 11 Mbps
Binary Phase Shift Keying (BPSK)–1 Mbps
Quaternary Phase Shift Keying (QPSK)–2 Mbps
Complementary Code Keying (CCK)–5.5 and 11
Mbps
–90 dBm at 1 Mbps
–88 dBm at 2 Mbps
–87 dBm at 5.5 Mbps
–83 dBm at 11 Mbps
–94 dBm at 1 Mbps
–91 dBm at 2 Mbps
–89 dBm at 5.5 Mbps
–85 dBm at 11 Mbps
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS
Technical Specifications
A-3
Advertisement
Table of Contents
Troubleshooting
