Table of Contents
Advertisement
102
Mobile Computing
Changing the main battery
Inserting a charged battery
To insert a battery:
1
Wipe the terminals of the charged battery with a clean
cloth to ensure a good connection.
2
Insert the charged battery into the slot until the latch
clicks.
The battery pack has been designed so that you cannot
install it with reverse polarity.
(Sample Illustration) Inserting the battery
If the battery is leaking or its case is cracked, put on
protective gloves to handle it, and discard it immediately.
Always dispose of used battery packs in compliance with
all applicable laws and regulations. Put insulating tape,
such as cellophane tape, on the electrode during
transportation to avoid a possible short circuit, fire or
electric shock. Failure to do so could possibly result in
serious injury.
If the battery does not slide into the slot easily, move the
battery release lock to the unlocked position and try
again. Do not force the battery into position.
Hide quick links:
Advertisement
Table of Contents
