Checking The Needle Drop Point With The Embroidery; Foot "W+" With Led Pointer - Brother BP2100 Operation Manual
Embroidery machine
Hide thumbs
Also See for BP2100:
- Quick setup manual (32 pages) ,
- Manual de instrucciones (180 pages) ,
- Operation manual (180 pages)
Table of Contents
Advertisement
a
Position the embroidery foot "W+" with
LED pointer or "W" on the presser foot bar
by aligning the notch of the presser foot to
the large screw.
Side view
b
Hold the embroidery foot in place with
your right hand, and then use the included
screwdriver to securely tighten the
embroidery foot screw.
→ For users of embroidery foot "W", skip step
d
go to step
.
CAUTION
• Use the included screwdriver to firmly tighten
the screw of the embroidery foot. If the screw
is loose, the needle may strike the embroidery
foot and possibly cause injury.
c
Plug the connector of the embroidery foot
"W+" with LED pointer into the jack on the
back of your machine.
d
Press
buttons.
→ All keys and operation buttons are unlocked, and
the previous screen is displayed.
■ Checking the Needle Drop Point
With the Embroidery Foot "W+"
with LED Pointer (For Embroidery
foot "W+" with LED pointer user
only)
Before beginning to embroider when using the
embroidery foot "W+" with LED pointer, carefully
read the procedures described in the "Embroidery"
and "Embroidery Edit" chapters.
a
Press
→ The LED pointer indicates the needle drop point.
c
and
Memo
• When the LED pointer is turned on, the
presser foot height is automatically adjusted
according to the fabric thickness.
• If
is remeasured and the presser foot is set to
the optimum height.
*
The LED pointer turns off automatically by lowering
the presser foot or returning to the previous page.
Note
• With bulky fabrics, the position may not be
accurate due to the various depths of the
fabrics.
• With fabric that has a very uneven surface
such as quilting, the fabric thickness may
not be correctly measured. In this case, the
pointer indication should be used only as a
reference.
CHANGING THE EMBROIDERY FOOT
to unlock all keys and
in the embroidery screen.
is pressed again, the fabric thickness
Basic operations B-43
B
1
- Quick Links:
- Embroidery Machine
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
