Table of Contents
Advertisement
Viewing Statistics
Viewing 802. 1 X EAP Statistics
Viewing 802.1X EAP Statistics
Cisco Small Business 200 Series Smart Switch Administration Guide
•
Interface—Select the type of interface and specific interface for which
Ethernet statistics are to be displayed.
•
Refresh Rate—Select the amount of time that passes before the Etherlike
statistics are refreshed.
The fields are displayed for the selected interface.
•
Frame Check Sequence (FCS) Errors—Received frames that failed the
CRC (cyclic redundancy checks).
•
Single Collision Frames—Frames that were involved in a single collision,
but were successfully transmitted.
•
Late Collisions—Collisions that have been detected after the first 512 bits
of data.
•
Excessive Collisions—Number of transmissions rejected due to excessive
collisions.
•
Oversize Packets—Packets greater than 2000 octets received.
•
Internal MAC Receive Errors—Frames rejected because of receiver errors.
•
Pause Frames Received—Received flow control pause frames.
•
Pause Frames Transmitted—Flow control pause frames transmitted from
the selected interface.
To clear statistics counters:
•
Click Clear Interface Counters to clear the selected interface's counters.
•
Click Clear All Interface Counters to clear the counters of all interfaces.
The 802. 1 x EAP page displays detailed information regarding the EAP (Extensible
Authentication Protocol) frames that were sent or received. To configure the
802. 1 X feature, see the 802. 1 X Properties page.
To view the EAP Statistics and/or set the refresh rate:
2
20
Hide quick links:
Advertisement
Table of Contents
