Contents Safety information ........Control panel..........Environment concerns....... Set your washing program......Product description........International wash code symbols....Technical data........... Programs informations....... Installation..........Washing programs........First use............ Care and cleaning........Daily use........... Something not working......Safety information Important! Only use the advised quantities of fabric softener and detergent.
Installation Garments which have been in contact with volatile petroleum products should not be This appliance is heavy. Care should be machine washed. If volatile cleaning fluids taken when moving it. are used, care should be taken to ensure When unpacking the appliance, check that that the fluid is removed from the garment it is not damaged.
Environment concerns Packaging materials With adequate pre-treatment, stains and limited soiling can be removed; the laundry The materials marked with the symbol can then be washed at a lower temperature. recyclable. Measure out detergent according to the >PE<=polyethylene water hardness, the degree of soiling and the >PS<=polystyrene quantity of laundry being washed.
Product description Detergent Dispenser Drawer Rating Plate Water Drain Hose Hose Holders Worktop Front Feet Back Feet Control Panel Water Inlet Hose Drain Hose Support Door Opening Handle Drain Filter Mains Cable Technical data Dimensions Width 60 cm Height 85 cm Depth 54 cm Power supply voltage/frequency...
Installation Very carefully Unpacking remove the front Important! polystyrene block (B) by gently pulling All transit bolts and packing must be the polyethylene removed before using the appliance. bag (1) downwards You are advised to keep all transit devices so then (2) out, that they can be refitted if the machine ever has ensuring not to tear...
Carefully level by In this case, make screwing the sure the end cannot adjustable feet come unhooked when in or out. the machine is emptying. Never place cardboard, wood or similar This could be done by tying it to the tap with a materials under the machine to compensate piece of string or attaching it to the wall.
Check that your domestic electrical installation Important! can take the maximum load required (2.0 kW), Connect the machine to an earthed socket. also taking into account any other appliances in use. The manufacturer declines any responsibility for damage or injury through failure to comply with the above safety precaution.
Page 9
Rust: oxalic acid dissolved in hot water or a Cotton, linen: drum full but not too tightly rust removing product used cold. Be careful packed; with rust stains which are not recent since the Synthetics: drum no more than half full; cellulose structure will already have been Delicate fabrics and woollens: drum no damaged and the fabric tends to hole.
Follow the product manufacturer’s Compartment : this compartment is recommendations on quantities to use and do used for washing powder or liquid. not exceed the MAX mark in the detergent Compartment : this compartment is used dispenser drawer. for fabric conditioner and starching agent. Do not spray stain pre-treatment products Aways add laundry detergents before switching (e.g.
Clip the flap down if you are going to use If you wish to carry out the “prewash” phase, liquid detergent. pour it into the compartment marked “ ”. Refit the dispenser back into its runners. If required, pour fabric softener into the compartment marked (the amount used Remember:...
Set your washing program Program selector dial Turn the program selector dial to the required program. The green Start/Pause ( ) light starts to flash. The selector dial is divided into following sections: (Cancelling/Off) (Rinse) (Drain) (Cottons) (Spin) (Cottons Prewash) (Cottons Economy) (Easy Iron) (Blanket)
Spin Buttons ( Auto Spin Reduction ( ): by selecting a programme, the appliance proposes automatically the maximum spin speed provided for that programme. By selecting Automatic Spin reduction the spin speed is reduced to a half, but not less than 400 rpm. The relevant light illuminates. Rinse Hold ( ): by selecting this option the water of the last rinse is not emptied out to prevent the fabrics from...
Page 14
Important! The selected delay can be changed only after selecting the washing program again. The door will be locked throughout the delay time. If you need to open the door, you must first set the washing machine to PAUSE by pressing the Start/Pause ( button and then wait about 3 minutes.
Altering an option or a running program Opening the door after the program has started It is possible to change any option before the program carries it out. The option “Quick Wash If you need to open the door, you must first set )”...
Programs informations To reset a programme and to switch off the machine turn the selector dial to “O”. Now, a new programme can be selected. (Cancelling/Off) Washing programme for white and coloured cottons fabrics. (Cottons) (Cottons select this program if you wish your laundry to be prewashed at 30° C Prewash) before the main wash.
Washing programs Type of laundry Max. Program/ Description Options Load Temperature of program White, coloured cotton Main wash at (1400 rpm for ZWH 6140P ; 1200 rpm for ZWH 6120P, 6121P ; and linen (Normally - 90° C Cottons 1000 rpm for ZWH 6100P, 6101P). soiled items).: e.g.
Type of laundry Max. Program/ Description Options Load Temperature of program For emptying out the Drain of Not available Drain water left in the drum. water (1400 rpm for ZWH 6140P ; Separate spin program Drain 1200 rpm for ZWH 6120P, 6121P ; Spin for spin out the water Long spin...
use a small brush To run a maintenance wash: to clean the recess. The drum should be empty of laundry. Select the hottest cotton wash program. Use a normal measure of detergent, must be a powder with biological properties. External cleaning Replace the drawer and run the rinse programme without any clothes in the drum.
Hold filter securly close the filter and pull upwards to cover. remove it from its position. insert the mains plug again. Remove eliminate the eventual fluff or small objects around the Important! filter. Do not start washing clothes without the filter in its place.
Something not working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Centre, please carry out the checks listed below. During machine operation it is possible that the red Start/Pause pilot light flashes to indicate that the machine is not working.
Page 22
Malfunction Possible cause Solution Too much detergent or unsuitable Reduce the detergent quantity or detergent (creates too much foam) use another one. has been used. Check whether there are any leaks Check the water inlet hose from one of the inlet hose fittings. It is connection.
Page 23
Malfunction Possible cause Solution The electronic unbalance detection Redistribute the laundry. device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum. This Spinning starts may happen several times before the late or the unbalance disappears and normal machine does not...