Software Upgrade Process
Command or Action
Step 15
redundancy force-switchover
Example:
Router# redundancy force-switchover
Step 16
request platform software package clean
Examples
This example shows ISSU upgrade using subpackages on a Cisco ASR 1006 router or ASR 1013 router
with a dual RP setup:
Router# show version
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version
12.2(33)XNA, RELEASE SOFTWARE (fc1)
<output removed for brevity>
System image file is "bootflash:packages.conf"
<output removed for brevity>
Router# show platform
Chassis type: ASR1006
Slot
--------- ------------------- --------------------- -----------------
0
0/0
0/1
0/2
0/3
1
1/0
1/1
1/3
R0
R1
F0
F1
P0
P1
Slot
--------- ------------------- ---------------------------------------
0
1
R0
R1
F0
F1
Router# show version r0 installed
Package: Provisioning File, version: n/a, status: active
File: bootflash:packages.conf, on: RP0
Built: n/a, by: n/a
File SHA1 checksum: 174bef13f7ce20af077bae7aaefb5279c790dd57
Type
State
ASR1000-SIP10
ok
SPA-4XT-SERIAL
ok
SPA-5X1GE-V2
ok
SPA-2XOC3-POS
ok
SPA-4XT-SERIAL
ok
ASR1000-SIP10
ok
SPA-4X1FE-TX-V2
ok
SPA-2X1GE-V2
ok
SPA-1XOC12-POS
ok
ASR1000-RP1
ok, active
ASR1000-RP1
ok, standby
ASR1000-ESP10
ok, active
ASR1000-ESP10
ok, standby
ASR1006-PWR-AC
ok
ASR1006-FAN
ok
CPLD Version
Firmware Version
07091401
12.2(33r)XNB
07091401
12.2(33r)XNB
07062111
12.2(33r)XNB
07062111
12.2(33r)XNB
07091401
12.2(33r)XNB
07091401
12.2(33r)XNB
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
ISSU Upgrade for Redundant Platforms
Purpose
Forces an RP switchover to complete the upgrade.
(Optional) Removes all unused subpackage files from the
router.
Insert time (ago)
00:03:03
00:01:35
00:01:35
00:01:36
00:01:35
00:03:03
00:01:36
00:01:35
00:01:36
00:03:03
00:03:03
00:03:03
00:03:03
00:02:07
00:02:07
53