Table of Contents
Advertisement
1.7.3
Installing a DIMM
Make sure to unplug the power supply before adding or removing DIMMs or
other system components. Failure to do so may cause severe damage to both
the motherboard and the components.
1.
Unlock a DDR2 DIMM socket
by pressing the retaining clips
outward.
2.
Align a DIMM on the socket
such that the notch on the DIMM
matches the break on the socket.
A DDR2 DIMM is keyed with a notch so that it fits in only one direction. DO NOT
force a DIMM into a socket to avoid damaging the DIMM.
3.
Firmly insert the DIMM into the
socket until the retaining clips snap
back in place and the DIMM is
properly seated.
1.7.4
Removing a DIMM
Follow these steps to remove a DIMM.
1.
Simultaneously press the
retaining clips outward to unlock
the DIMM.
Support the DIMM lightly with your fingers when pressing the retaining clips.
The DIMM might get damaged when it flips out with extra force.
2.
Remove the DIMM from the socket.
ASUS P5KPL-CM
1
Unlocked retaining clip
Locked Retaining Clip
1
DDR2 DIMM notch
3
2
DDR2 DIMM notch
2
1
1-19
Hide quick links:
Advertisement
Table of Contents
