Table of Contents
Advertisement
Connecting the Power Cord
Note
Connecting a CSS 11503 Power Cord
Connecting a CSS 11503 AC Power Cord
Cisco 11500 Series Content Services Switch Hardware Installation Guide
2-28
Plug the power cord into a dedicated 3-wire grounding receptacle.
3.
See the
"Powering Up the CSS"
4.
The CSS 11501 power supply is autosensing for voltage and frequency, and it
requires no additional modifications.
The following sections provide information on:
Connecting a CSS 11503 AC Power Cord
•
•
Connecting a CSS 11503 DC Power Cord
To connect an AC power cord to a CSS 11503:
At the rear of the chassis, ensure that the CSS power switch is in the O (off)
1.
position.
Plug the AC power cord connector into the CSS power connector, as shown
2.
in
Figure
2-12.
Chapter 2
Cabling and Troubleshooting the CSS
section to power on the CSS.
78-16421-01
Advertisement
Table of Contents
Troubleshooting
