Cisco 7304 Installation And Configuration Manual page 28
Network service engine
Hide thumbs
Also See for 7304:
- Quick start manual (41 pages) ,
- Installation and configuration manual (54 pages) ,
- Manual (111 pages)
Table of Contents
Advertisement
NSE-150 Description
Figure 2-1
ACTIVE
SYSTEM-UP
NETWORK SERVICE ENGINE 150
LED Label
Color
ACTIVE
Green
SYSTEM-UP
Green/Yellow
STANDBY
Green
GIGABIT ETHER-
Green/Yellow
NET 0 LINK
GIGABIT ETHER-
Green/Yellow
NET 1 LINK
GIGABIT ETHER-
Green/Yellow
NET 2 LINK
GIGABIT ETHER-
Green/Yellow
NET 3 LINK
DISK 0
Green/Yellow
FE Management Port
Green/Yellow
LINK
Cisco 7304 Network Service Engine Installation and Configuration
2-2
NSE-150 LEDs
CLASS 1 LASER PRODUCT / LASERPRODUKT DE KLASS 1 / PRDUIT LASER DE CLASE 1 / PRODUCTO LASER CLASE 1 /
GIGABIT ETHERNET 0
GIGABIT ETHERNET 1
GIGABIT ETHERNET 2
GIGABIT ETHERNET 3
LINK
LINK
LINK
LINK
STANDBY
RESET
SFP
SFP
SFP
State
On
Off
Green
Yellow
Off
On
Off
Green
Yellow
Off
Green
Yellow
Off
Green
Yellow
Off
Green
Yellow
Off
Green
Yellow
Off
Green
1
COMPACT FLASH
SFP
Function
NSE is up and running.
NSE is off. Default state on power up.
Cisco IOS is up and running.
ROMmon is booting up, ROMmon detects a fatal hardware error, or ROM-
mon is hanging before the system completes the bootup process.
ROMmon has completed the bootup process and the system either is in the
autoboot stage or is waiting for a user command at a rommon#> prompt, or
the NSE is off.
The NSE is the standby NSE in a High Availability configuration.
The NSE is not running or is running as the primary NSE.
Gigabit Ethernet port 0 is up.
Gigabit Ethernet port 0 line protocol is down due to a link error or other
conditions.
Default state on power up, Gigabit Ethernet port 0 has been administratively
shut down, or a fatal hardware error has occurred.
Gigabit Ethernet port 1 is up.
Gigabit Ethernet port 1 line protocol is down due to a link error or other
conditions.
Default state on power up, Gigabit Ethernet port 1 has been administratively
shut down, or a fatal hardware error has occurred.
Gigabit Ethernet port 2 is up.
Gigabit Ethernet port 2 line protocol is down due to a link error or other
conditions.
Default state on power up, Gigabit Ethernet port 2 has been administratively
shut down, or a fatal hardware error has occurred.
Gigabit Ethernet port 3 is up.
Gigabit Ethernet port 3 line protocol is down due to a link error or other
conditions.
Default state on power up, Gigabit Ethernet port 3 has been administratively
shut down, or a fatal hardware error has occurred.
CompactFlash Disk is being accessed.
CompactFlash Disk access failure.
Default state on power up.
Fast Ethernet physical link is up, line protocol is up.
Chapter 2
0
1
DISK 0
LINK
FE 0
USB
FOR MANAGEMENT USE ONLY
NSE-150 Overview
CAUTION:
THIS ASSEMBLY
CONTAINS
ELECTRO-STATIC
SENSITIVE DEVICES
7300-NSE-150
CONSOLE
AUX
OL-3967-01
Advertisement
Table of Contents
Troubleshooting
