Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Configuration Manual
Regulatory Compliance and Safety Information
for the Cisco 7301 Internet Router
Document Revision History
The Document Revision History table below records technical changes to this document beginning with
version 78-16178-02.
Document
Versions
78-16178-04
78-16178-03
78-16178-02
Read this document before installing or servicing the following systems:
Cisco 7301
Only trained and qualified service personnel (as defined in IEC 60950 and AS/NZS 3260) should install,
Note
replace, or service the equipment. Install the system in accordance with the U.S. National Electric Code
if you are in the United States.
Warning
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents.
This document includes the following sections:
•
•
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2007 Cisco Systems, Inc. All rights reserved.
Date
July, 2007
November, 2006
August 8, 2005
Translated Safety Warnings, page 2
Japanese Electric Appliance and Radio Laws, page 51
Change Summary
Adding telecom information
Adding Statement 371
Updating and arranging safety warnings in alphabetical
order
Advertisement
Table of Contents
Related Manuals for Cisco CISCO7301
Summary of Contents for Cisco CISCO7301
-
Page 1: Regulatory Compliance And Safety Information
Translated Safety Warnings, page 2 • Japanese Electric Appliance and Radio Laws, page 51 • Americas Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA © 2007 Cisco Systems, Inc. All rights reserved. Date Change Summary July, 2007... -
Page 2: Table Of Contents
Translated Safety Warnings European Directives, page 52 • Regulatory Standards Compliance, page 53 • EMC Environmental Conditions for Products Installed in the European Union, page 57 • EMC Class A Statements/Warnings, page 57 • GR-1089-Core Intrabuilding Lightning-Immunity Requirements, page 59 •... - Page 3 Statement 162—EU Public Network Port Warning, page 31 • Statement 200—Safety Information Referral Warning, page 32 • Statement 1001—Work During Lightning Activity, page 33 • Statement 1004—Installation Instructions, page 34 • Statement 1008—Class 1 Laser Product Warning, page 35 • Statement 1027—Class 1 LED Product, page 35 •...
-
Page 4: Statement 2—Chassis Warning—Disconnecting Telephone-Network Cables
Translated Safety Warnings ¡Advertencia! Antes de utilizar cualquier sistema equipado con interruptor de Encendido/Apagado (ON/OFF), cortar la alimentación y desenchufar el cable de alimentación. Varning! Slå AV strömmen och dra ur nätsladden innan du utför arbete på ett system med strömbrytare. Statement 2—Chassis Warning—Disconnecting Telephone-Network Cables Before opening the chassis, disconnect the telephone-network cables to avoid contact with Warning... -
Page 5: Statement 4—Power Supply Warning
Statement 4—Power Supply Warning Warning Do not touch the power supply when the power cord is connected. For systems with a power switch, line voltages are present within the power supply even when the power switch is off and the power cord is connected. -
Page 6: Statement 12—Power Supply Disconnection Warning
Translated Safety Warnings ¡Advertencia! No tocar la fuente de alimentación mientras el cable esté enchufado. En sistemas con interruptor de alimentación, hay voltajes de línea dentro de la fuente, incluso cuando el interruptor esté en Apagado (OFF) y el cable de alimentación enchufado. En sistemas sin interruptor de alimentación, hay voltajes de línea en la fuente cuando el cable está... -
Page 7: Statement 13—Circuit Breaker (15A) Warning
¡Advertencia! Antes de manipular el chasis de un equipo o trabajar cerca de una fuente de alimentación, desenchufar el cable de alimentación en los equipos de corriente alterna (CA); cortar la alimentación desde el interruptor automático en los equipos de corriente continua (CC). Varning! nnan du arbetar med ett chassi eller nära strömförsörjningsenheter skall du för växelströmsenheter dra ur nätsladden och för likströmsenheter bryta strömmen vid... -
Page 8: Statement 15—Chassis Warning—Rack-Mounting And Servicing
Translated Safety Warnings Aviso Este produto depende das instalações existentes para protecção contra curto-circuito (sobrecarga). Assegure-se de que um fusível ou disjuntor não superior a 240 VAC, 10A é utilizado nos condutores de fase (todos os condutores de transporte de corrente). ¡Advertencia! Este equipo utiliza el sistema de protección contra cortocircuitos (o sobrecorrientes) deló... - Page 9 Varoitus Kun laite asetetaan telineeseen tai huolletaan sen ollessa telineessä, on noudatettava erityisiä varotoimia järjestelmän vakavuuden säilyttämiseksi, jotta vältytään loukkaantumiselta. Noudata seuraavia turvallisuusohjeita: Jos telineessä ei ole muita laitteita, aseta laite telineen alaosaan. • Jos laite asetetaan osaksi täytettyyn telineeseen, aloita kuormittaminen sen alaosasta kaikkein •...
- Page 10 Translated Safety Warnings Advarsel Unngå fysiske skader under montering eller reparasjonsarbeid på denne enheten når den befinner seg i et kabinett. Vær nøye med at systemet er stabilt. Følgende retningslinjer er gitt for å verne om sikkerheten: Denne enheten bør monteres nederst i kabinettet hvis dette er den eneste enheten i kabinettet. •...
-
Page 11: Statement 18—Invisible Laser Radiation Warning
Statement 18—Invisible Laser Radiation Warning Warning Invisible laser radiation may be emitted from the aperture ports of the single-mode FDDI card when no cable is connected. Avoid exposure and do not stare into open apertures. Following is an example of the warning label that appears on the product: WARNING AVOID EXPOSURE–Invisible Laser rad- iation is emitted from transmit ports. -
Page 12: Statement 22—Selv Circuit Warning
Translated Safety Warnings Aviso Radiação laser invisível poderá ser emitida através das portas de abertura da placa FDDI (Interface de Dados Distribuídos por Fibra Óptica) de modo simples, mesmo quando não houver nenhum cabo ligado. Evite exposição e não espreite por estas aberturas. -
Page 13: Statement 33—Battery Handling Warning
Avvertenza Le porte contrassegnate da "Ethernet", "10BaseT", "TokenRing", "Console" e "AUX" sono circuiti di sicurezza con tensione molto bassa (SELV). I circuiti SELV devono essere collegati solo ad altri circuiti SELV. Dato che i circuiti BRI vengono trattati come tensioni di rete telefonica, evitare di collegare il circuito SELV ai circuiti in cui è... -
Page 14: Statement 37—Restricted Area Warning
Translated Safety Warnings Avvertenza Pericolo di esplosione se la batteria non è installata correttamente. Sostituire solo con una di tipo uguale o equivalente, consigliata dal produttore. Eliminare le batterie usate secondo le istruzioni del produttore. Advarsel Det kan være fare for eksplosjon hvis batteriet skiftes på feil måte. Skift kun med samme eller tilsvarende type som er anbefalt av produsenten. -
Page 15: Statement 39—Grounded Equipment Warning
Avvertenza Questa unità deve essere installata in un'area ad accesso limitato. Un'area ad accesso limitato è un'area accessibile solo a personale di assistenza tramite un'attrezzo speciale, lucchetto, o altri dispositivi di sicurezza, ed è controllata dall'autorità responsabile della zona. Advarsel Denne enheten er laget for installasjon i områder med begrenset adgang. -
Page 16: Statement 43—Jewelry Removal Warning
Translated Safety Warnings ¡Advertencia! Este equipo debe conectarse a tierra. Asegurarse de que el equipo principal esté conectado a tierra durante el uso normal. Varning! Denna utrustning är avsedd att jordas. Se till att värdenheten är jordad vid normal användning. Statement 43—Jewelry Removal Warning Before working on equipment that is connected to power lines, remove jewelry (including rings, Warning... -
Page 17: Statement 52—Chassis Lifting Warning
¡Advertencia! Antes de operar sobre equipos conectados a líneas de alimentación, quitarse las joyas (incluidos anillos, collares y relojes). Los objetos de metal se calientan cuando se conectan a la alimentación y a tierra, lo que puede ocasionar quemaduras graves o que los objetos metálicos queden soldados a los bornes. - Page 18 Translated Safety Warnings Warnung Zum Anheben des Chassis werden zwei Personen benötigt. Fassen Sie das Chassis unterhalb der unteren Kante an und heben es mit beiden Händen an. Um Verletzungen zu vermeiden, ist der Rücken aufrecht zu halten und das Gewicht mit den Beinen, nicht mit dem Rücken, anzuheben.
-
Page 19: Statement 66—Main Disconnecting Device
Statement 66—Main Disconnecting Device Warning The plug-socket combination must be accessible at all times because it serves as the main disconnecting device. Waarschuwing De combinatie van de stekker en het elektrisch contactpunt moet te allen tijde toegankelijk zijn omdat deze het hoofdmechanisme vormt voor verbreking van de aansluiting. -
Page 20: Statement 76—Selv Circuit Warning
Translated Safety Warnings Statement 76—SELV Circuit Warning Warning To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. -
Page 21: Statemente 77—Wan Port Static Shock Warning
¡Advertencia! Para evitar la sacudida eléctrica, no conectar circuitos de seguridad de voltaje muy bajo (safety extra-low voltage = SELV) con circuitos de voltaje de red telefónica (telephone network voltage = TNV). Los puertos de redes de área local (local area network = LAN) contienen circuitos SELV, y los puertos de redes de área extendida (wide area network = WAN) contienen circuitos TNV. -
Page 22: Statement 90—Customer Equipment Warning
Translated Safety Warnings Aviso Existem sempre tensões de rede perigosas nas portas WAN, independentemente da corrente para a unidade estar desligada (OFF) ou ligada (ON). Para evitar choques eléctricos, tenha o devido cuidado ao trabalhar junto das portas WAN. Ao desconectar os cabos, separe primeiro a extremidade do cabo que se encontra ligada à... -
Page 23: Statement 92—Awg Warning
Translated Safety Warnings Warnung Die E1-Schnittstellenkarte darf nur in einer von der Australian Communications Authority (ACA) zugelassenen Teilnehmereinrichtung oder einer von den ACA-Zulassungsanforderungen ausgenommenen Datenendeinrichtung (DEE) installiert werden. Die Teilnehmereinrichtung muß in einem Gehäuse untergebracht sein, das mit Aufschraubdeckeln versehen ist, um den Zugang der Benutzer zu Überspannungen an der Teilnehmereinrichtung zu verhindern. -
Page 24: Statement 93—Ground Conductor Warning
Translated Safety Warnings Attention Pour réduire le risque d’incendie, n’utiliser que des cordons de lignes de télécommunications de type AWG nº 26 ou plus larges. Warnung Zur Reduzierung der Feuergefahr eine Fernmeldeleitungsschnur der Größe 26 AWG oder größer verwenden. Avvertenza Per ridurre il rischio di incendio, usare solo un cavo per linea di telecomunicazioni di sezione 0,12 (26 AWG) o maggiore. -
Page 25: Statement 94—Wrist Strap Warning
Avvertenza Non escludere mai il conduttore di protezione né usare l’apparecchiatura in assenza di un conduttore di protezione installato in modo corretto. Se non si sa con certezza che è disponibile un collegamento di messa a terra adeguato, esaminare le Norme CEI pertinenti o rivolgersi a un elettricista qualificato. -
Page 26: Statement 96—Circuit Breaker (15A) Warning
Translated Safety Warnings Advarsel Bruk jordingsarmbånd under prosedyren for å unngå ESD-skader på kortet. Unngå direkte berøring av bakplanet med hånden eller metallverktøy, slik at di ikke får elektrisk støt. Aviso Durante este procedimento e para evitar danos ESD causados à placa, use fitas de ligação à terra para os pulsos. -
Page 27: Statement 123—Class 1 Led Product (Multimode)
Aviso Este produto depende da instalação existente para obter protecção contra curto-circuito (sobrecarga). Certifique-se de que um fusível ou disjuntor listado e certificado (de acordo com os requisitos UL), não superior a 60 VAC, 15A, é utilizado em todos os condutores de transporte de corrente. -
Page 28: Statement 124—More Than One Power Supply Warning
Translated Safety Warnings Statement 124—More Than One Power Supply Warning Warning This unit might have more than one power supply connection. All connections need to be removed to de-energize the unit. Waarschuwing Deze eenheid kan meer dan één stroomtoevoerverbinding bevatten. Alle verbindingen dienen ontkoppeld te worden om de eenheid te ontkrachten. - Page 29 Varoitus Varmista, että tasavirtapiirissä ei ole virtaa ennen maadoitus- tai virtajohtojen kytkemistä asennuspohjaan tai ennen niiden irrottamista. Varmistaaksesi, että virta on KATKAISTU täysin, paikanna tasavirrasta huolehtivassa kojetaulussa sijaitseva suojakytkin, käännä suojakytkin KATKAISTU-asentoon ja teippaa suojakytkimen varsi niin, että se pysyy KATKAISTU-asennossa. Attention Avant de connecter ou de déconnecter les câbles d'alimentation (pôles et terre) du châssis, vérifiez que le circuit de courant continu est hors tension : localisez le disjoncteur sur le panneau de...
-
Page 30: Statement 142—Faceplates And Cover Panel Requirement
Translated Safety Warnings Statement 142—Faceplates and Cover Panel Requirement Warning Blank faceplates and cover panels serve three important functions: they prevent exposure to hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI) that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not operate the system unless all cards, faceplates, front covers, and rear covers are in place. -
Page 31: Statement 162—Eu Public Network Port Warning
¡Advertencia! Las placas frontales y los paneles de relleno cumplen tres funciones importantes: evitan la exposición a niveles peligrosos de voltaje y corriente dentro del chasis; reducen la interferencia electromagnética (EMI) que podría perturbar la operación de otros equipos y dirigen el flujo de aire de enfriamiento a través del chasis. -
Page 32: Statement 200—Safety Information Referral Warning
Translated Safety Warnings Aviso Se o símbolo de adequação com uma cruz sobreposta aparecer acima de uma porta, não conectar a porta a uma rede pública que obedece aos padrões da União Europeia. A conexão da porta a este tipo de rede pública pode causar avarias ou danos severos ao seu distribuidor. -
Page 33: Statement 1001—Work During Lightning Activity
Aviso Antes de instalar, funcionar com, ou prestar assistência ao sistema, leia o Guia de Preparação e Segurança do Local. Este guia contém informações de segurança importantes que deve conhecer antes de trabalhar com o sistema. ¡Advertencia! Antes de instalar, manejar o arreglar el sistema, le aconsejamos que consulte la Guía de prevención y preparación de una instalación. -
Page 34: Statement 1004—Installation Instructions
Translated Safety Warnings Statement 1004—Installation Instructions Warning Read the installation instructions before connecting the system to the power source. Waarschuwing Raadpleeg de installatie-instructies voordat u het systeem op de voedingsbron aansluit. Lue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen. Varoitus Attention Avant de brancher le système sur la source d'alimentation, consulter les directives d'installation. Warnung Vor dem Anschließen des Systems an die Stromquelle die Installationsanweisungen lesen. -
Page 35: Statement 1008—Class 1 Laser Product Warning
Statement 1008—Class 1 Laser Product Warning Warning Class 1 Laser Product Waarschuwing Waarschuwing voor klasse 1 laserprodukten Varoitus Lasertuote luokka 1 Avertissement Produits Laser Class 1 Warnung Produkt-Warnhinweis zu Lasergeräten der Klasse 1 Avvertenza Prodotto Laser di Classe 1 Advarsel! Advarsel for laserprodukter i klasse 1 Aviso Aviso sobre produtos a laser da Classe 1... -
Page 36: Statement 1028—More Than One Power Supply
Translated Safety Warnings Varning! Lysdiodprodukt av klass 1 Statement 1028—More Than One Power Supply This unit might have more than one power supply connection. All connections must be removed to Warning de-energize the unit. Statement 1028 Waarschuwing Deze eenheid kan meer dan één stroomtoevoeraansluiting bevatten. Alle aansluitingen dienen ontkoppeld te worden om de eenheid te ontkrachten. - Page 37 Translated Safety Warnings Aviso Esta unidade pode ter mais de uma conexão de fonte de alimentação. Todas as conexões devem ser removidas para interromper a alimentação da unidade. Advarsel Denne enhed har muligvis mere end en strømforsyningstilslutning. Alle tilslutninger skal fjernes for at aflade strømmen fra enheden.
-
Page 38: Statement 1030—Equipment Installation
Translated Safety Warnings Statement 1030—Equipment Installation Only trained and qualified personnel should be allowed to install, replace, or service Warning this equipment. Waarschuwing Deze apparatuur mag alleen worden geïnstalleerd, vervangen of hersteld door bevoegd geschoold personeel. Varoitus Tämän laitteen saa asentaa, vaihtaa tai huoltaa ainoastaan koulutettu ja laitteen tunteva henkilökunta. - Page 39 Translated Safety Warnings Somente uma equipe treinada e qualificada tem permissão para instalar, substituir ou dar Aviso manutenção a este equipamento. Advarsel Kun uddannede personer må installere, udskifte komponenter i eller servicere dette udstyr. Regulatory Compliance and Safety Information for the Cisco 7301 Internet Router 78-16178-04...
-
Page 40: Statement 1040—Product Disposal
Translated Safety Warnings Statement 1040—Product Disposal Warning Ultimate disposal of this product should be handled according to all national laws and regulations. Waarschuwing Het uiteindelijke wegruimen van dit product dient te geschieden in overeenstemming met alle nationale wetten en reglementen. Varoitus Tämä... -
Page 41: Statement 1043—Service Personnel Warning
Statement 1043—Service Personnel Warning This equipment is to be installed and maintained by service personnel only as defined by AS/NZS Warning 3260 Clause 1.2.14.3 Service Personnel. Deze apparatuur mag slechts geïnstalleerd en onderhouden worden door servicepersoneel Waarschuwing conform de definitie van AS/NZS 3260 Clausule 1.2.14.3 Service Personnel. Varoitus Tämän laitteen saa asentaa tai huoltaa ainoastaan Australiassa ja Uudessa Seelannissa sovellettavan AS/NZS 3260 -standardin kohdan 1.2.14.3 Service Personnel määrittelemä... -
Page 42: Statement 1046—Installing Or Replacing The Unit
Translated Safety Warnings Advarsel Installasjon og vedlikehold av dette utstyret skal kun foretas av vedlikeholdspersonell som definert i AS/NZS 3260, klausul 1.2.14.3 Service Personnel. Aviso Este equipamento deverá ser instalado e reparado apenas por pessoal de manutenção qualificado, conforme estipulado em AS/NZS 3260 Cláusula 1.2.14.3 Service Personnel. ¡Advertencia! Este equipo se debe instalar y mantener solamente por personal de servicio, según definido por AS/NZS 3260 Cláusula 1.2.14.3 Service Personnel. - Page 43 Translated Safety Warnings Aviso Ao instalar ou substituir a unidade, a conexão terra sempre deve ser executada primeiro e desconectada em seguida. Advarsel Ved installation og genmontering af enheden, skal jordforbindelsen altid installeres først og afinstalleres sidst. Regulatory Compliance and Safety Information for the Cisco 7301 Internet Router 78-16178-04...
-
Page 44: Statement 1051—Laser Radiation
Translated Safety Warnings Statement 1051—Laser Radiation Warning Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams or view directly with optical instruments. Waarschuwing Losgekoppelde of losgeraakte glasvezels of aansluitingen kunnen onzichtbare laserstraling produceren. Kijk niet rechtstreeks in de straling en gebruik geen optische instrumenten rond deze glasvezels of aansluitingen. - Page 45 Translated Safety Warnings Aviso Radiação laser invisível pode ser emitida a partir de fibras ou conectores desconectados. Não fixe o olhar nos feixes e nem olhe diretamente com instrumentos ópticos. Advarsel Usynlig laserstråling kan forekomme fra brugte fibre eller stik. Stir ikke ind i stråler eller direkte med optiske instrumenter.
-
Page 46: Statement 1071—Warning Definition
Translated Safety Warnings Statement 1071—Warning Definition Warning IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. - Page 47 Translated Safety Warnings Warnung WICHTIGE SICHERHEITSHINWEISE Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden.
- Page 48 Translated Safety Warnings Varning! VIKTIGA SÄKERHETSANVISNINGAR Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanliga förfaranden för att förebygga olyckor. Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning.
- Page 49 Translated Safety Warnings Aviso INSTRUÇÕES IMPORTANTES DE SEGURANÇA Este símbolo de aviso significa perigo. Você se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os circuitos elétricos e familiarize-se com as práticas padrão de prevenção de acidentes.
- Page 50 Translated Safety Warnings Regulatory Compliance and Safety Information for the Cisco 7301 Internet Router 78-16178-04...
-
Page 51: Japanese Electric Appliance And Radio Laws
Japanese Electric Appliance and Radio Laws Japanese Electric Appliance and Radio Laws Statement 371—Power Cable and AC Adapter Regulatory Compliance and Safety Information for the Cisco 7301 Internet Router 78-16178-04... -
Page 52: European Directives
Este equipamento está em conformidade com os requisitos essenciais e outras provisões relevantes da Directiva 1999/5/EC. Romania: Prin prezenta, noi Cisco Systems România SRL, declarãm pe propria rãspundere cã produsul Cisco 7301, îndeplineste principalele cerinþe de conformitate cu Directiva Europeanã 1999/5/EC. Suomi: Tämä... -
Page 53: Regulatory Standards Compliance
Regulatory Standards Compliance This section includes all regulatory, safety, EMC Class A , telecom, and NEBS standards. The Cisco 7301 is in compliance with national and international standards as described in Table 1 Specification Regulatory Standards Compliance Safety Telecom (Cable Modem) Telecom (Analog Modem) 78-16178-04 Regulatory Standards Compliance... - Page 54 Regulatory Standards Compliance Table 1 Regulatory Standards Compliance (continued) Specification Telecom (Analog FXO) Telecom (Analog FXS) Telecom (Analog E&M) Telecom (Analog DID) Telecom (Serial—X.25) Telecom (BRI) Regulatory Compliance and Safety Information for the Cisco 7301 Internet Router Description AS/ACIF S002:2001 AS/ACIF S003:2001 EIA/TIA-968-A IC CS-03...
- Page 55 Table 1 Specification Telecom (PRI) Telecom (E1) Telecom (T1) Telecom (E3) Telecom (Optical) Telecom (DSL) Radio CDMA/GSM/UMTS systems 78-16178-04 Regulatory Standards Compliance (continued) Description EIA/TIA-968-A IC CS-03 AS/ACIF S038:2001 CTR4 (98/520/EC) CTR34 (98/518/EC) HKTA 2015 IDA TS ISDN2 IS6100 Jate Green Book AS/ACIF S016:2001 CTR12 (97/520/EC) CTR13 (97/521/EC)
- Page 56 Regulatory Standards Compliance Table 1 Regulatory Standards Compliance (continued) Specification 2.4 GHz 802.11 systems 5150–5350, 5470–5725 MHz 802.11 systems 5725–5850 MHz systems 1. CSA = Canadian Standards Association 2. EN = European Norm 3. IEC = International Electrotechnical Commission 4. TS = Technical Specification 5.
-
Page 57: Emc Environmental Conditions For Products Installed In The European Union
The Cisco 7301 meets the industry EMC, safety, and environmental standards described in Table 2 Specification NEBS ETSI 1. NEBS = Network Equipment Building System 2. ETSI = European Telecommunication Standards Institute EMC Environmental Conditions for Products Installed in the European Union This section applies to products to be installed in the European Union. - Page 58 EMC Class A Statements/Warnings Canada – Class A This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. International – CISPR 22 Class A This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
-
Page 59: Gr-1089-Core Intrabuilding Lightning-Immunity Requirements
Korea – Class A Class A Device should be aware of this. If this type was sold or purchased by mistake, it should be replaced with a residential-use type. This section includes additional cautions that might apply to your products. GR-1089-Core Intrabuilding Lightning-Immunity Requirements To comply with GR-1089-Core intrabuilding lightning-immunity requirements, you must use grounded, Caution... - Page 60 Telecom Approvals Listing If you experience trouble with this equipment, please contact Cisco Systems for repair and warranty information. If the problem is causing harm to the telephone network, the telephone company might request that you remove the equipment from the network until the problem is resolved. All repairs should be handled by authorized Cisco Systems service personnel.
-
Page 61: Japan – Jate Certification
Japan – JATE Certification The Cisco 7301 meets the requirements of the Japan Approvals Institute for Telecommunications Equipment (JATE). Table 5 Applicant Name Nihon Cisco Systems Nihon Cisco Systems Nihon Cisco Systems Nihon Cisco Systems 78-16178-04 lists the CS-03 approval numbers for the equipment. -
Page 62: Site Preparation And Safety Information
Site Preparation and Safety Information Table 5 Applicant Name Nihon Cisco Systems Nihon Cisco Systems Nihon Cisco Systems Nihon Cisco Systems Nihon Cisco Systems Nihon Cisco Systems Nihon Cisco Systems Nihon Cisco Systems Nihon Cisco Systems Nihon Cisco Systems Nihon Cisco Systems... -
Page 63: Creating A Safe Environment
Connect AC-powered systems to grounded power outlets. • Connect the system to earth (ground). • Creating a Safe Environment Keep tools and chassis components off the floor and away from foot traffic. • Clear the area of possible hazards, such as moist floors, ungrounded power extension cables, and •... - Page 64 Site Preparation and Safety Information If you are using a two-post rack, ensure that the weight of the chassis does not make the rack • unstable. Secure the two-post rack with ceiling brackets if the rack is populated with heavy equipment.
-
Page 65: Power Considerations
Ensure that your footing is solid and the weight of the system is evenly distributed between your • feet. • Lift the system slowly, keeping your back straight. Lift with your legs, not with your back. Bend at the knees, not at the waist. •... -
Page 66: Preventing Esd
Site Preparation and Safety Information Preventing ESD Electrostatic discharge (ESD) damage occurs when electronic cards or components are mishandled and can result in complete or intermittent failures. Note the following guidelines before you install or service the system: Always wear an ESD-preventive wrist or ankle strap when handling electronic components. Connect •... - Page 67 Do not touch the power supply when the power cord is connected. Line voltages are present within • the power supply even when the power switch is off and the power cord is connected. Working with WAN Interfaces • Use caution when installing or modifying telephone lines to prevent electric shock. •...
-
Page 68: Preventing Emi
Site Preparation and Safety Information Figure 5 CLASS 1 LASER PRODUCT LASERPRODUKT DER KLASSE 1 PRODUIT LASER DE CLASSE 1 PRODUCTO LASER CLASE 1 Fiber optic lasers, when they are installed, comply with DHHS Rules 21 CFR Subchapter J, applicable at date of manufacture. APPARATEN SKALL ANSLUTAS TILL JORDET NÄTUTTAG. -
Page 69: Related Documentation
This document is to be used in conjunction with the documents listed in the Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. - Page 70 Related Documentation Regulatory Compliance and Safety Information for the Cisco 7301 Internet Router 78-16178-04...