Statically Assign An Ip Address - D-Link Xtreme N Duo DAP-1522 User Manual
Wireless bridge
Hide thumbs
Also See for Xtreme N Duo DAP-1522:
- User manual (105 pages) ,
- Quick installation manual (65 pages) ,
- Configuration (4 pages)
Table of Contents
Advertisement
Appendix B - Networking Basics
Statically Assign an IP address
If you are not using a DHCP capable gateway/access point, or you need to assign a static IP address, please follow
the steps below:
Step 1
Windows
XP - Click on Start > Control Panel > Network Connections.
®
Windows
2000 - From the desktop, right-click My Network Places > Properties.
®
Step 2
Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4
Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN
IP address on your access point.
Example: If the access point´s LAN IP address is 192.168.0.1, make your IP address
192.168.0.X where X is a number between 2 and 99. Make sure that the number
you choose is not in use on the network. Set Default Gateway the same as the LAN
IP address of your access point (192.168.0.1).
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The
Secondary DNS is not needed or you may enter a DNS server from your ISP.
Step 5
Click OK twice to save your settings.
D-Link DAP-15 User Manual
Hide quick links:
Advertisement
Table of Contents
