Table of Contents
Advertisement
Tightening torque:
Locknut:
42 N·m (4.2 kgf·m, 31 lb·ft)
EWB00451
WARNING
This shock absorber assembly contains highly
pressurized nitrogen gas. If the shock absorb-
er assembly is damaged, it could explode
causing injury or property damage. Shock ab-
sorber cylinder damage could also result in
poor handling which could cause an accident.
Do not tamper with or attempt to open the
cylinder assembly.
Do not subject the shock absorber assembly
to an open flame or other high heat.
Do not deform or damage the cylinder in any
way.
Do not dispose of a damaged or worn out
shock absorber assembly yourself. Take the
shock absorber assembly to a Yamaha deal-
er for any service.
EBU30992
Rear shock absorber (YFM70RSXJ /
YFM70RSSJ)
This shock absorber assembly is equipped with a
spring preload adjusting nut, a rebound damping
force adjusting screw, with a compression damp-
ing force adjusting bolt (for fast compression
damping), and a compression damping force ad-
justing screw (for slow compression damping).
EWB02681
WARNING
Suspension components become hot during
operation. Never touch the compression
damping force adjusting bolt and screw, the
rebound damping force adjusting screw or the
oil reservoir with your bare hand or skin until
the suspension components have cooled.
ECB00091
NOTICE
Never turn an adjusting mechanism beyond
the minimum and maximum settings.
4-21
4
Advertisement
Table of Contents
Troubleshooting
