Table of Contents
Advertisement
EBU24744
Brake light switches
The brake light, which is activated by the brake
pedal and brake lever, should come on just before
braking takes effect.
The brake light switch for the brake pedal can be
adjusted as follows, but the front brake light
switch should be adjusted by a Yamaha dealer.
Turn the rear brake light switch adjusting nut while
holding the brake light switch in place. To make
the brake light come on earlier, turn the adjusting
nut in direction (a). To make the brake light come
on later, turn the adjusting nut in direction (b).
8
1. Rear brake light switch
2. Rear brake light switch adjusting nut
1
2
(a)
(b)
EBU29753
Adjusting the clutch lever free play
1
(b)
(a)
1. Rubber cover
2. Clutch lever free play adjusting bolt
3. Locknut
4. Clutch lever free play
Clutch lever free play:
8.0–13.0 mm (0.31–0.51 in)
Periodically check the clutch lever free play and
adjust if necessary.
1. Slide the rubber cover back.
2. Loosen the locknut at the clutch lever.
8-37
3
2
4
Advertisement
Table of Contents
Troubleshooting
