Table of Contents
Advertisement
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Allow the machine to cool down.
4.
Clamp the hose on the fuel tank side of the fuel
filter.
5.
Replace the fuel filter
Note:
Ensure that the markings on the filter
follow the fuel flow direction.
Figure 43
Note:
Install the fuel-line hoses and secure them
with plastic ties the same as they were originally
installed at the factory to keep the fuel line away from
components that could cause fuel line damage.
Servicing the Fuel Tank
Do not attempt to drain the fuel tank. Ensure that an
Authorized Service Dealer drains the fuel tank and
services any components of the fuel system.
(Figure
43).
g029685
Electrical System
Maintenance
Electrical System Safety
•
Disconnect the battery before repairing the
machine. Disconnect the negative terminal first
and the positive last. Connect the positive terminal
first and the negative last.
•
Charge the battery in an open, well-ventilated
area, away from sparks and flames. Unplug the
charger before connecting or disconnecting the
battery. Wear protective clothing and use insulated
tools.
Servicing the Battery
Service Interval: Monthly
DANGER
Battery electrolyte contains sulfuric acid
which is fatal if consumed and causes severe
burns.
Do not drink electrolyte and avoid contact
with skin, eyes or clothing. Wear safety
glasses to shield your eyes and rubber gloves
to protect your hands.
Removing the Battery
WARNING
Incorrectly removing the cables from battery
could damage the machine and cables,
causing sparks. Sparks can cause the battery
gasses to explode, resulting in personal
injury.
• Always disconnect the negative (black)
battery cable before disconnecting the
positive (red) cable.
• Always connect the positive (red) battery
cable before connecting the negative
(black) cable.
1.
Park the machine on a level surface, move the
speed-control lever to the N
disengage the blade-control switch (PTO), and
engage the parking brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Disconnect the negative battery cable (black)
from the negative (-) battery terminal
43
position,
EUTRAL
(Figure
44).
Advertisement
Table of Contents
