Table of Contents
Advertisement
Installing the Controller
Attaching the Cable Management Bracket
Before you begin
The cable management brackets should be mounted to each rack-mount bracket on the chassis to provide
cable management to both sides of the chassis. These brackets are screw-mounted to the rack-mount brackets
to allow easy installation and removal of cables.
The cable-management brackets for the controller contains one independent cable-management U-type feature
with two screws for each bracket.
Note
Step 1
Align the cable-management bracket to the rack-mount bracket on one side of the controller.
The cable-management bracket aligns to the top hole of the chassis rack-mount bracket.
Step 2
Using a Phillips screwdriver, insert one screw through the top screw hole of the cable-management bracket and into the
chassis rack-mount bracket and tighten the screw
Use the package of screws that came with your chassis containing four screws.
Note
The following figure shows where to attach the cable-management brackets to the controller.
Figure 12: Attaching the Cable-Management Brackets to the Controller
1
Cable-management bracket
2
Cable-management bracket screw
Note
Use the package of screws that came with your chassis containing four screws.
Step 3
Insert the cable management screw into the screw hole of the cable-management bracket and into the chassis rack-mount
bracket and tighten the screw using a Philips screwdriver.
Step 4
Repeat step 1 to step 3 for the other side of the chassis.
Chassis Ground Connection
Warning
Make certain that the cable-management bracket "U" feature is facing upwards when you attach it to the
chassis.
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority
or an electrician if you are uncertain that suitable grounding is available
Statement 1024
Cisco Catalyst CW9800H1 and CW9800H2 Wireless Controllers Hardware Installation Guide
Attaching the Cable Management Bracket
3
Chassis front rack-mount bracket
55
Advertisement
Chapters
Table of Contents
