Sealey SV20 Series Quick Start Manual
40v 30cm cordless grass strimmer body only
Hide thumbs
Also See for SV20 Series:
- Manual (12 pages) ,
- Instruction manual (8 pages) ,
- Quick start manual (7 pages)
Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS &
CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO
SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE
FOR FUTURE USE.
Refer to
Wear eye
instructions
protection
1.
SAFETY
1.1.
GENERAL SAFETY
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock,
‰
fire and/or serious injury.
Be familiar with the controls and proper use of the equipment.
9
WARNING! Cutting elements continue to rotate after the motor is switched off.
‰
DO NOT allow children or people unfamiliar with the instructions to use the machine. Local regulations may restrict the age of the operator.
8
Never operate the machine while people, especially children, or pets are nearby.
8
Only use the machine in daylight or good artificial light.
9
Before using the machine and after any impact, check for signs of wear or damage and repair as necessary.
9
Take care against injury from any device fitted for trimming the filament line length. After extending new cutter line always return the
9
machine to its normal operating position before switching on.
DO NOT fit metal cutting elements.
8
Never replace the non-metallic cutting means with metallic cutting means
8
Never allow children , persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge or people
9
unfamiliar with these instructions to use the machine, local regulations may restrict the age of the operator.
Use the tool with the utmost care and attention.
9
Operate the tool only if you are in good physical condition. Perform all work calmly and carefully. Use common sense and keep in mind
9
that the operator or user is responsible for accidents or hazards occurring to other people or their property.
DO NOT operate the tool when tired, feeling ill or under the influence of alcohol or drugs.
8
The tool should be switched off immediately if it shows any signs of unusual operation.
9
Keep fingers away from switch trigger when not operating the tool and when moving from one operating position to another.
9
Dress Properly. The clothing worn should be functional and appropriate, i.e. it should be tight-fitting but not cause hindrance.
9
DO NOT wear either jewellery or clothing which could become entangled with high grass. Wear protective hair covering to contain long hair.
8
When using the tool, always wear sturdy shoes with a non-slip sole. This protects against injuries and ensures a good footing.
9
Always wear protective goggles to protect your eyes from injury when using power tools. The goggles must comply with local regulations.
9
It is an employer's responsibility to enforce the use of appropriate safety protective equipments by the tool operators and by other per-
9
sons in the immediate working area.
Always be sure of your footing on slopes and when walking with the machine. Never run.
9
Disconnect the supply when the following occurs: the machine is left by the user; before clearing a blockage; before checking, cleaning
9
or working on the machine; after striking a foreign object to inspect the machine for damage; if the machine starts to vibrate abnormally.
Never operate the machine with a defective guard or shield, or without safety devices, or if the cord is damaged or worn.
8
Avoid using the machine in bad weather conditions, especially when there is a risk of lightning.
8
1.2.
ELECTRICAL AND BATTERY SAFETY
DO NOT use the tool in damp or wet locations or expose it to rain. Water entering the tool will increase the risk of electric shock.
8
Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk
9
of fire when used with another battery pack.
Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
9
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal
9
objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid
9
contacts eyes, seek medical help. Liquid ejected from the battery may cause irritation or burns.
DO NOT dispose of the battery(ies) in a fire. The cell may explode. Check with local codes for possible special disposal instructions
8
DO NOT open or mutilate the battery(ies). Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic
8
if swallowed.
DO NOT charge battery in rain, or in wet locations.
8
Non-rechargeable batteries are not to be recharged.
9
Rechargeable batteries are to be removed from the appliance before being charged.
9
Different types of batteries or new and used batteries are not to be mixed.
8
Batteries are to be inserted with the correct polarity.
9
Exhausted batteries are to be removed from the appliance and safely disposed of.
9
© Jack Sealey Limited
40V SV20 SERIES 30CM CORDLESS GRASS
STRIMMER BODY ONLY
CP40VGS
MODEL NO:
Wear ear
Wear protective
protection
gloves
Original Language Version
DO NOT
WARNING!
expose to rain
Thrown objects.
Keep
bystanders
away.
CP40VGS
Issue 4
12/01/24
Advertisement
Related Manuals for Sealey SV20 Series
Summary of Contents for Sealey SV20 Series
- Page 1 CP40VGS MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS &...
- Page 2 Tape or mask off open contacts and pack up the battery in such a manner that it cannot move around in the packaging. Follow your local regulations relating to disposal of battery. Use the batteries only with the products specified by Sealey. Installing the batteries to non-compliant products may result in a fire, excessive heat, explosion, or leak of electrolyte.
- Page 3 Designed for the professional, offering heavy-duty, high performance, durable tools with lightweight composite designs for superior control and comfort. Operates using 2 x 20V batteries from the Sealey SV20 Series (batteries must be of the same Ah rating) Wide cutting width of 30cm. Bump feed line. 2-in-1 function fitted with wheels for grass strimming and edging. 90° rotating head allows for a comfortable cutting angle.
- Page 4 ‰ the tool from unintended starting. Never use the tool if it starts when you pull the switch trigger without pushing forward the lock-off button. Ask your Sealey Service Centre for repairs. WARNING! Never disable the lock function or tape down the lock-off button.
- Page 5 5.11.2. Hold the front grip and insert the plastic pin as shown in fig.14. 5.11.3. Embed the nut onto the bottom of the front grip as shown in the fig.16. FIG.13 FIG.14 FIG.12 FIG.15 FIG.16 FIG.17 FIG.18 FIG.19 CP40VGS Issue 4 12/01/24 Original Language Version © Jack Sealey Limited...
- Page 6 If the nylon cord is torn in the spool, set the nylon cord again referring to the replacement procedure in this manual. FIG.28 CP40VGS Issue 4 12/01/24 Original Language Version © Jack Sealey Limited...
- Page 7 NOTE: Never use gasoline, benzine, thinner, alcohol or the like. Discolouration, deformation or cracks may result. To maintain product safety and reliability, repairs, any other maintenance or adjustment should be performed by Sealey Authorised Centres, always using Sealey replacement parts. Maintenance should be performed when performance/function decreases.
- Page 8 Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual, do not attempt to dismantle the tool. Instead, ask a Sealey Authorised Service Centre. Always using Sealey replacement parts for repairs.
- Page 9 BATTERY REMOVAL Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack Sealey Ltd Batteries Producer Registration Number (BPRN) is BPRN00705.