Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear protective
instruction
gloves
manual
Risk of electric
shock
1.
SAFETY
1.1.
GENERAL POWERED TOOL SAFETY WARNINGS
Read all the safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or serious injury.
Save all warning and instructions for future reference.
9
Inspect and ensure equipment is in good working order before use.
9
Maintain and clean tool and battery pack regularly. check air holes are clear.
9
WARNING! Keep all parts of the body away from the cutter blade. Do not remove cut material or hold material to be cut when blades are
‰
moving. Make sure the switch is OFF when clearing jammed material. A moment of inattention while operating the hedge trimmer may
result in serious personal injury.
WARNING! Carry the hedge trimmer by the handle with the cutter blade stopped. When transporting or storing the hedge trimmer always
‰
fit the cutting device cover. Proper handling of the hedge trimmer will reduce possible personal injury from the cutter blades.
WARNING! Hold the power tool by insulated gripping surfaces only, as the cutter blade may contact hidden wiring. Cutter blades
‰
contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock.
WARNING! Risk assess the work area. Keep bystanders and children away from the work area. DO NOT operate with anyone or pets
‰
nearby. Check intended work area for wildlife.
WARNING! ''Prevent unintentional starting. Ensure the switch is in the OFF position before connecting to the power source and/or battery
‰
pack, picking up or carrying the tool. Carrying power tools with your fingers on the switch or energising power tools that have the switch on
invites accidents.''
WARNING! Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges, and refrigerators. There is an
‰
increased risk of electric shock if your body is earthed or grounded.
WARNING! Keep work area clean and well lit. Cluttered or dark areas invite the risk of accidents.
‰
WARNING! Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of a
‰
power tool may result in personal injury.
WARNING! DO NOT allow water to enter into power tool. This will increase the risk of an electric shock.
‰
WARNING! Never allow children, persons with reduced physical sensory or mental capabilities or lack of experience and knowledge or
‰
people unfamiliar with these instructions to use the machine, local regulations may restrict the age of the operator.
WARNING! Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with
‰
water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
WARNING! Always check the hedge before cutting for foreign objects, electrical cables etc.
‰
WARNING! Use of the power tool, accessories, and tool bits etc, in accordance with these instructions, taking into account the working
‰
conditions, and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous
situation and serious injury.
DO NOT use if power tool vibrates abnormally, switch off, remove battery and then inspect.
8
DO NOT touch hazardous moving parts. Allow power tool to come to a complete stop first.
8
DO NOT use if damaged. DO NOT operate with defective guards or shields or without safety devices, and protective clothing.
8
DO NOT use for a task it was not designed to perform.
8
Always store with the battery removed and separate from the power tool, in a dry, childproof location.
9
DO NOT force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at
8
the rate for which it was designed.
Hedge trimmer is fitted with a hand shield.
9
Hedge trimmer has a measured Sound power level 96dB. And has been tested in accordance with the outdoors Noise by Equipment
9
Regulations 2001.
© Jack Sealey Limited
40V SV20 SERIES 52CM HEDGE TRIMMER BODY
ONLY
MODEL NO:
Wear face
Wear ear
Wear protective
shield
protection
Original Language Version
CP40VHT
Do not use in
clothing
rain
Wear
DANGER
appropriate
be aware of
footwear
thrown objects
CP40VHT
Issue 2
Keep
bystanders
Away
09/01/24
Advertisement
Related Manuals for Sealey CP40VHT
Summary of Contents for Sealey CP40VHT
- Page 1 CP40VHT MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 Have your power tools services by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Never disassemble the hedge trimmer yourself. For servicing and repair always contact your local Sealey Service Centre. Or place of purchase.
- Page 3 DO NOT short the battery cartridge. Liquid ejected from the battery may cause irritation or burns. Battery powered - Operates using 2 x 20V batteries from the Sealey SV20 Series (batteries must be of the same Ah rating). WARNING! Remove battery before: performing maintenance, carrying out adjustments, inspecting the machine after striking an object, ‰...
- Page 4 Part of the SV20 Series designed for the professional, offering heavy-duty, high performance, durable tools with lightweight composite designs for superior control and comfort. Operates using 2 x 20V batteries from the Sealey SV20 Series (batteries must be of the same Ah rating).
- Page 5 CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. 7.2.1. SHEAR BLADE MAINTENANCE 7.3. Before the operation or once per hour during operation, apply low-viscosity oil (machine oil, or spray-type lubricating oil) to the shear blades. CP40VHT Issue 2 09/01/24 © Jack Sealey Limited Original Language Version...
- Page 6 Remove the battery. Dispose of according to local government guidelines. Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705.