Sealey SV20 Series Manual
40v 35cm cordless chainsaw body only
Hide thumbs
Also See for SV20 Series:
- Manual (12 pages) ,
- Quick start manual (9 pages) ,
- Instruction manual (8 pages)
Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
Wear eye
Refer to
protection
instructions
Keep bystanders
Beware of
away
Kickback
1. SAFETY
NOTE: Seek professional advice and training to ensure safe and effective use of this tool.
WARNING! Read all safety warnings, instructions, illustrations and specifications provided with this tool. Failure to follow all
‰
instructions listed below may result in electric shock, fire and/or serious injury.
Save all warning and instructions for future reference.
9
WARNING! Disconnect the saw from the battery unit before changing accessories, servicing, performing any maintenance or storing.
‰
1.1.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark area invites accidents
9
DO NOT operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools
8
create sparks which may ignite the dust or fumes.
Keep children and bystanders away whilst operating a power tool. Distractions can cause you to lose control.
9
1.2.
ELECTRICAL SAFETY
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges, and refrigerators. There is an increased risk
‰
of electric shock if your body is earthed or grounded.
DO NOT expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
8
1.3.
PERSONAL SAFETY
DO NOT use a power tool whilst you are tired or under the influence of drugs, alcohol, or medication. A moment inattention whilst
8
operating power tools may result in serious injury.
DO NOT overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected
8
situations. Dress properly.
DO NOT wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair
8
can be caught in moving parts.
DO NOT let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A
8
careless action can cause severe injury within a fraction of a second.
Stay alert, watch what you are doing and use common sense when operating a power tool.
9
Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes,
9
hard hat or hearing protection use for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or battery pack, picking
9
up or carrying the tool. Carrying power tools with your fingers on the switch or energising power tools that have the switch on invites
accidents.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power
9
tool may result in personal injury.
1.4.
POWER TOOL USE AND CARE
DO NOT force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer
8
at the rate for which it was designed.
DO NOT use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is
8
dangerous and must be repaired. Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the
power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and DO NOT allow persons unfamiliar with these power tools or these instructions
9
to operate the power tool. Power tools are dangerous in the hands of untrained users.
© Jack Sealey Limited
40V SV20 SERIES 35CM CORDLESS
CHAINSAW BODY ONLY
MODEL NO:
Wear head
Wear protective
protection
gloves
Use both hands
Appropriate
Protection Foot-
leg, Hand-Arm
Original Language Version
CP40VCS
Wear ear
Wear protective
protection
clothing
Avoid touching
Avoid rain and
tip to avoid
wet conditions
kickback
Wear safety
Wear face mask
footwear
CP40VCS
Issue 2
11/01/2024
Advertisement
Related Manuals for Sealey SV20 Series
Summary of Contents for Sealey SV20 Series
- Page 1 CHAINSAW BODY ONLY CP40VCS MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. Wear eye Wear head...
- Page 2 The indicator LEDs light up to show battery state (fig.B) See chart alongside for explanation. Check button Depress switch to fig. B fig. A Load / unload battery. State indicators CP40VCS Issue 2 11/01/2024 Original Language Version © Jack Sealey Limited...
- Page 3 Part of the SV20 Series designed for the professional, offering heavy-duty, high performance, durable tools with lightweight composite designs for superior control and comfort. Operates using 2 x 20V batteries from the Sealey SV20 Series (batteries must be of the same Ah rating). Tool- less chain tensioning and built-in chain lubrication.
- Page 4 4.4.5. Depress the sprocket cover and move the guide bar backward or forward until it locks in place with a little click (fig.8). fig. 6 fig. 7 fig. 8 CP40VCS Issue 2 11/01/2024 Original Language Version © Jack Sealey Limited...
- Page 5 WARNING!: Remove batteries before working on saw. ‰ NOTE: Use only good quality chain saw oil. See www.sealey.co.uk for further information. NOTE: Check oil level before and during every use. Running with little or no oil will damage the tool.
- Page 6 The user of the chain saw must not perform maintenance work which is not described in the instruction manual. All such work must be carried out by suitably qualified individuals. CP40VCS Issue 2 11/01/2024 Original Language Version © Jack Sealey Limited...
- Page 7 MAINTENANCE SCHEDULE CP40VCS Issue 2 11/01/2024 Original Language Version © Jack Sealey Limited...
- Page 8 8. TROUBLESHOOTING CP40VCS Issue 2 11/01/2024 Original Language Version © Jack Sealey Limited...
- Page 9 - Hand-Arm Vibration at Work. BATTERY REMOVAL Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705.