Table of Contents
Advertisement
Hardware Features
This section describes the following hardware features of the C9124AXI-x, C9124AXD-x, and C9124AXE-x
models:
•
•
•
•
•
•
Access Point Views, Ports, and Connectors
Cisco Catalyst 9124AX Series Outdoor AP has multiple options that you can use to power the AP or join the
AP to the controller. For information about connectors and ports for the AP models, see
on the AP, on page
Note
The illustrations in this document show all the available connections for the AP. The connector plugs seal the
unused connection ports to ensure that the AP is watertight. Liquid-tight adapters are provided for connector
openings. You can install the adapters before or after deploying the AP.
Connectors and Ports on the AP
The following illustrations show the different connector and port options available on the base and sides of
the AP.
Access Point Views, Ports, and Connectors, on page 7
C9124AXI (Internal Antenna) Model: Antenna Radiation Patterns, on page 11
C9124AXD (Directional Antenna) Model: Antenna Radiation Patterns, on page 14
C9124AXE (External Antenna) Model: Antenna Radiation Patterns, on page 17
Supported External Antennas, on page 23
Power Sources, on page 26
7.
Cisco Catalyst 9124AX Series Outdoor Access Point Hardware Installation Guide
2
C H A P T E R
Connectors and Ports
7
Advertisement
Table of Contents
