Maintenance; Recommended Maintenance Schedule(S); Maintenance Safety - Toro SnowMaster 724 ZXR Operator's Manual
Snowthrower
Hide thumbs
Also See for SnowMaster 724 ZXR:
- Operator's manual (44 pages) ,
- Operator's manual (20 pages)
Table of Contents
Advertisement
Maintenance
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
After the first hour
After the first 2 hours
Before each use or daily
Every 100 hours
Yearly
Yearly or before storage
Maintenance Safety
Read the following safety precautions before
performing any maintenance on the machine:
•
Shut off the engine, remove the key, and wait
for all movement to stop before you leave the
operator's position. Allow the machine to cool
before adjusting, servicing, cleaning, or storing it.
•
Always wear eye protection while performing an
adjustment or repair to protect your eyes from
foreign objects that the machine may throw.
•
Check all fasteners at frequent intervals for proper
tightness to ensure that the machine is in safe
working condition.
•
Do not change the governor settings on the engine.
Purchase only genuine Toro replacement parts
and accessories.
Maintenance Procedure
• Check for loose fasteners and tighten them if necessary.
• Change the engine oil.
• Inspect the auger cable and adjust it if necessary.
• Inspect the transmission cable and adjust it if necessary.
• Check the engine-oil level and add oil if necessary.
• Replace the spark plug.
• Check the skids and adjust them if necessary.
• Inspect the throwing edges and have an Authorized Service Dealer replace the
throwing edges and scraper if necessary.
• Change the engine oil.
• Inspect the auger cable and adjust it if necessary.
• Inspect the transmission cable and adjust it if necessary.
• Check for loose fasteners and tighten them if necessary.
• Have an Authorized Service Dealer inspect the drive belt and replace it if necessary.
• Prepare the machine for storage.
11
Advertisement
Table of Contents
