Table of Contents
Advertisement
Recycling the Clippings
Your machine comes from the factory ready to recycle
the grass and leaf clippings back into the lawn.
Note:
The grass bag may remain on the machine
while you are recycling the clippings.
To recycle the clippings, move the bag-on-demand
lever to the R
ECYCLING
Figure 17
1. R
position
ECYCLING
position
(Figure
17).
2. B
position
AGGING
Bagging the Clippings
Use the grass bag to collect grass and leaf clippings
from the lawn.
WARNING
A worn grass bag could allow small stones
and other similar debris to be thrown toward
you or bystanders, resulting in serious
personal injury or death.
Check the grass bag frequently. If it is
damaged, install a new Toro replacement bag.
WARNING
The blade is sharp; contacting the blade can
result in serious personal injury.
Shut off the engine and wait for all moving
parts to stop before leaving the operating
position.
1.
Shut off the engine and wait for all moving parts
to stop.
2.
Install the grass bag; refer to
Bag (page 12)
lever to the
17.
Installing the Grass Bag
g012135
1.
Shut off the engine and wait for all moving parts
to stop.
2.
Raise and hold up the rear deflector, install the
bag in the notches, and lower the rear deflector
(Figure
18).
12
Installing the Grass
and move the bag-on-demand
position as shown in
BAGGING
Figure 18
Figure
g014468
Advertisement
Table of Contents
