Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Beko WMB 81443 LX
Summary of Contents for Beko WMB 81443 LX
- Page 1 Washing Machine WMB 81443 LX...
-
Page 2: Important Safety Instructions
1 Important safety instructions damages that may arise from procedures carried out by unauthorized persons. This section contains safety instructions that will Intended use help protect from risk of personal injury or property • This product has been designed for domestic damage. Failure to follow these instructions shall void use. It is not suitable for commercial use and it any warranty. -
Page 3: Removing The Transportation Locks
Removing the transportation locks Otherwise, your laundry will come out hot at the end of the washing process and wear out. Do not remove the transportation locks before 2. Tighten all hose nuts by hand. Never use a taking out the packaging reinforcement. wrench when tightening the nuts. Remove the transportation safety bolts before operating the washing machine, otherwise, the product will be damaged. 1. Loosen all the bolts with a spanner until they rotate freely (C). 2. Remove transportation safety bolts by turning them gently. -
Page 4: Electrical Connection
Adjusting the feet First use Before starting to use the product, make sure that In order to ensure that the product operates all preparations are made in accordance with the more silent and vibration-free, it must stand level instructions in sections "Important safety instructions" and balanced on its feet. Balance the machine and "Installation". by adjusting the feet. Otherwise, the product may To prepare the product for washing laundry, perform move from its place and cause crushing and first operation in Drum Cleaning programme. If vibration problems. your machine is not featured with Drum Cleaning programme, use Cottons-90 programme and select Additional Water or Extra Rinse auxiliary functions as well. Before starting the programme, put max. 100 g of powder anti-limescale into the main wash detergent... - Page 5 3 Preparation Correct load capacity The maximum load capacity depends on the type Things to be done for energy saving of laundry, the degree of soiling and the washing Following information will help you use the product in programme desired. an ecological and energy-efficient manner.
- Page 6 any instruction on the package, apply the following. • Wash your delicate clothes only with special • If the gel detergent thickness is fluidal and detergents (liquid detergent, wool shampoo, etc.) your machine does not contain a special liquid used solely for delicate clothes. detergent cup, put the gel detergent into the main • When washing dark coloured clothes and quilts, wash detergent compartment during first water it is recommended to use liquid detergent. intake. If your machine contains a liquid detergent • Wash woolens with special detergent made cup, fill the detergent into this cup before starting specifically for woolens.
-
Page 7: Tips For Efficient Washing
Tips for efficient washing Clothes Light colours and Delicates/ Colors Dark colors whites Woolens/Silks (Recommended (Recommended (Recommended (Recommended temperature range temperature range temperature range temperature range based based on soiling level: based on soiling based on soiling on soiling level: cold-40C) 40-90C) level: cold-40C) level: cold-30C) It may be necessary to pre-treat the Powder and stains of perform liquid detergents prewash. -
Page 8: Operating The Product
4 Operating the product Control panel Spin Speed Adjustment button Delayed Start buttons (+ / -) Display Auxiliary Function buttons Temperature Adjustment button Start / Pause / Cancel button Programme Selection knob On / Off button Display symbols Preparing the machine Make sure that the hoses are connected tightly. Plug in your machine. Turn the tap on completely. Place the laundry in the machine. Add detergent and fabric softener. Programme selection 1. Select the programme suitable for the type, quantity and soiling degree of the laundry in accordance with the "Programme and... -
Page 9: Main Programmes
• Super short express Always select the lowest required temperature. Use this programme to wash your little amount of Higher temperature means higher power lightly soiled cotton clothes in a short time. consumption. • Super For further programme details, see "Programme Use this programme to wash your laundry for which and consumption table". you cannot use Cottons 60 °C programme. It gives Main programmes the same result with the Cottons 60 °C programme Depending on the type of fabric, use the following by washing for a longer time at 40 °C, thus enabling main programmes. energy saving. • Shirts • Cottons Use this programme to wash the shirts made of Use this programme for your cotton laundry (such cotton, synthetic and synthetic blended fabrics... -
Page 10: Spin Speed Selection
cold wash option appears on the display. If you scroll to cold wash option and press Temperature Adjustment button again, the recommended temperature for the selected programme appears on the display. Press the Temperature Adjustment button again to decrease the temperature. Economy symbol Indicates the programmes and temperatures that provide energy savings. Economy symbol can not be selected in Intensive and Hygiene programmes since washing is performed in long times and at high temperatures in order to provide hygiene. -
Page 11: Programme And Consumption Table
Programme and consumption table Auxiliary functions Selectable temperature Programme range °C Cottons 2.60 1600 • • • • • 90-Cold Cottons 1.75 1600 • • • • • 90-Cold Cottons 0.90 1600 • • • • • 90-Cold Duvet (Bedding) 0.67 • 60-40 Babycare 2.70 1600... -
Page 12: Auxiliary Function Selection
Auxiliary function selection If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause / Cancel button. Select the desired auxiliary functions before starting The programme resumes. Water is drained, laundry is the programme. Furthermore, you may also select spun and the programme is completed. or cancel auxiliary functions that are suitable to the running programme by pressing the Start / Pause / The Soaking auxiliary function ensures better removal Cancel button when the machine is operating. For of stains ingrained into the clothes by holding them in this, the machine must be in a step before the auxiliary the detergent water prior to startup of the programme. function you are going to select or cancel. - Page 13 programme will turn on. Loading door is locked and light of the relevant step during which the machine Door Locked symbol appears on the display. The was switched into the pause mode will flash. Wait symbol of the step from which the programme has until the Loading Door can be opened. Open the started appears on the display (Prewash, Main Wash, Loading Door and add or take out the laundry. Close Rinse, Softener and Spin). the Loading Door. Make changes in auxiliary functions, Progress of programme temperature and speed settings if necessary. Press Progress of a running programme is indicated on the Start / Pause / Cancel button to start the machine.
-
Page 14: Maintenance And Cleaning
5 Maintenance and cleaning If the machine fails to drain water, the pump filter is clogged. Filter must be cleaned whenever it is Service life of the product extends and frequently clogged or in every 3 months. Water must be drained faced problems decrease if cleaned at regular off first to clean the pump filter. intervals. In addition, prior to transporting the machine (eg., Cleaning the detergent drawer when moving to another house) and in case of Clean the detergent drawer at regular intervals (every freezing of the water, water may have to be drained 4-5 washing cycles) as shown below in order to completely. -
Page 15: Technical Specifications
Place a large container in front of the filter to catch If your product has a water jet feature, be sure water from the filter. Loosen pump filter (anticlockwise) to fit the filter into its housing in the pump. Never until water starts to flow. Fill the flowing water into the force the filter while installing it into its housing. container you have placed in front of the filter. -
Page 16: Troubleshooting
7 Troubleshooting Programme cannot be started or selected. • Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> Press and hold Start / Pause button for 3 seconds to reset the machine to factory settings. (See "Canceling the programme") Water in the machine. • Some water might have remained in the product due to the quality control processes in the production. >>> This is not a failure; water is not harmful to the machine. Machine vibrates or makes noise.