Cisco IE 4010 Hardware Installation Manual page 73

Hide thumbs Also See for IE 4010:

Table of Contents

Configuring the Switch with the CLI Setup Program

Step 11

Enter all entries in English letters and Arabic numbers.

In the Network Settings (Required for Static IP):

• IP Address: Enter a valid IP address for the switch.

You can later use the IP address to access the switch through Device Manager.

• Switch Username and Password : Enter a password. The password can be from 1 to 25 alphanumeric characters,

can start with a number, is case sensitive, allows embedded spaces, but does not allow spaces at the beginning or

end. In the Confirm Password field, enter the password again.

Note

You must change the password from the default password, cisco.

• Default Gateway: Enter the IP address of the router.

Cisco IE 4010 Switch Hardware Installation Guide

Express Setup Procedure

Table of Contents

Show Quick Links

Table of Contents

Ie-4010-16s12p Ie-4010-4s24p