Related Manuals for Beko WTV 8744 CS XWAT
Summary of Contents for Beko WTV 8744 CS XWAT
- Page 1 Washing Machine User Manual WTV 8744 CS XWAT Document Number : 2820526568_EN/ 22-06-20.(12:02)
- Page 2 Dear Customer, Please read this user manual first! Thank you for preferring a Beko product. We hope that you get the best results from our product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
-
Page 3: Table Of Contents
CONTENTS 1. General safety instructions 1.1 Children's safety ...........................5 1.2 Product Safety ..........................5 1.3 Electrical safety..........................8 1.4 Hot surface safety ........................8 1.5 Other ..............................8 2. Instructions for environmental protection 2.1 Compliance with WEEE Directive ..................11 2.2 Disposing of the waste product ..................11 2.3 Package information ........................11 2.4 What you can do for energy saving ...................11 3. - Page 4 8.5.7 Using tablet and capsule liquid detergents ................29 8.5.8 Using softeners ............................ 29 8.5.9 Using starch ............................30 8.5.10 Using limescale remover ........................ 30 8.5.11 Using bleaches ............................ 30 8.6 Displayed Program Time .......................30 9. Programmes and auxiliary functions 9.1 Programme selection ......................
-
Page 5: General Safety Instructions
1. General safety instructions 1.1 Children's safety • Children under the age of should be kept away unless continuously supervised. •This product can be used by children at and WARNING! above years old and by persons whose physical, sensory or mental capabilities were not fully developed or who lack experience and knowledge provided that they are supervised or trained on the safe usage of the product and... - Page 6 • Do not force open the locked loading door. The door will open immediately after the washing cycle has ended. If the door does not open, apply the solutions provided for "Loading door cannot be opened." error in the Troubleshooting section.
- Page 7 • Foam rubber (latex foam), shower caps, waterproof textiles, clothes or pillows with rubber support or rubber foam pads must not be used in the Wash&Wear auxiliary programme selection or in the Refresh programme. It may cause fire risk. • If you use washing ball, detergent scale, laundry clothing cages and balls in your machine, they can melt during drying.
-
Page 8: Electrical Safety
• Underwear with metal attachments must not be used in the Refresh programme and the Wash&Wear auxiliary function selection. Metal supports might come off during drying and cause damage in the machine. 1.3 Electrical safety • Do not operate faulty products until repaired by an Authorised Service Agent. - Page 9 • If you will place a dryer on to the washing machine, secure it with the suitable connection apparatus that you can obtain from the Authorised Service Agent. • Unplug the product, turn the tap off and contact your Authorised Service Agent without tampering with the product if the product has been damaged.
- Page 10 • Ambient temperatures between 15 C and C are ideal temperatures for your product. • Do not operate the Refresh programme and the Wash&Wear programme after overloading the machine. Observe the maximum load levels specified. • Leather laundry and laundry that contains leather must not be used in the Refresh programme and the Wash&Wear auxiliary function selection.
-
Page 11: Instructions For Environmental Protection
2. Instructions for environmental protection 2.1 Compliance with WEEE Directive This product does not contain harmful and forbidden materials described in the "Regulation on the Control of the Waste Electrical and Electronic Equipment" issued by T.R. Ministry of Environment and Urbanization. It complies with the WEEE Directive. -
Page 12: Intended Use
Following information will help you use the product in an ecological and energy-efficient manner. a) Operate the product in the highest load capacity allowed for the programme you have selected, but do not overload. See, “Programme and consumption table”. b) Follow the recommended temperatures in the programme and consumption table. -
Page 13: Your Product
4. Your product 4.1 Overview 1- Power cable 2- Top panel 3- Control panel 4- Water discharge hose 5- Loading door 6- Filter cap 7- Adjustable feet 8- Detergent drawer EN / 13 Washing Machine / User’s Manual... -
Page 14: Package Contents
4.2 Package contents Power cable Water discharge hose Transportation safety bolts Mains water inlet hose Liquid detergent container User manual Plastic plug group • Figures in this manual are schematic and may not match the product exactly. NOTE EN / 14 Washing Machine / User’s Manual... -
Page 15: Control Panel
4.3 Control panel WTV 8744 CS XWAT Osvěžení Bavlna Osvieženie Děti a alergici Bavlna Eco Deti a alergici Zrychlené praní Košile Teplota Syntetika Zap. / Vyp. Zrýchlené pranie Košele Odstranění skvrn Extra rychlé praní Odstránenie škvŕn Extra rýchle pranie Odložený start Otáčky... -
Page 16: Screenshot
4.4 Screenshot Temperature indicator 2 - Temperature symbol 3 - No water symbol 4 - Programme follow-up indicator 5 - Quick wash indicator 6 - Duration information Auxiliary functions light 1 8 - Auxiliary functions light 2 9 - Delayed start enabled symbol 10 - Door lock is engaged symbol 11 - Child lock enabled symbol 12 - Auxiliary functions light 3... -
Page 17: Technical Specifications
Main model code 9820 Complying Commission Delegated Regulation (EU) No 1061/2010 Supplier name or trademark Beko WTV 8744 CS XWAT Model name 7178041800 Rated capacity (kg) Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency) A+++ Annual Energy Consumption (kWh) Energy consumption of the standard 60°C cotton programme at full load (kWh) -
Page 18: Installation
6. Installation 6.1 Appropriate installation location • Damaged products cause risks for your safety. - Prior to installation, visually check if the product has any defects on it. WARNING! - If so, do not have it installed. • Do not place the product on a floor without sufficient capacity to carry the load. -
Page 19: Removing Packaging Reinforcement
a) Place the product on a solid and level floor. b) Never place the product on a carpet-covered floor. c) Do not lean the product on furniture, keep a distance of at least 1.5 cm between them. d) Do not place the product on any platform. 6.2 Removing packaging reinforcement •... -
Page 20: Connecting Water Supply
b) Remove transportation safety bolts by turning them gently. c) After removing bolts, close the holes with plugs provided in the user manual bag. • Keep the transportation safety bolts in a safe place for reuse when the product needs to be moved again in the NOTE future. -
Page 21: Connecting The Water Draining Hose To The Drain
a) Connect the straight end of the mains inlet hose provided with the product to the cold water tap and the warped end to the water inlet on the back of the product as shown in the figure. b) Tighten all hose nuts by hand. Never use a tool when tightening the nuts. -
Page 22: Adjusting The Feet
d) To prevent the waste water to go back into the product again and to ensure easy drainage, do not immerse the end of the hose into the waste water or do not insert it into the drain for more than 15 cm. If it is too long, cut it short. -
Page 23: Electrical Connection
a) Loosen the lock nuts on the feet by hand. b) Adjust the feet until the product stands level and balanced. c) Tighten all lock nuts again by hand. 6.7 Electrical connection • Damaged power cables must be replaced by the Authorised Service Agent. -
Page 24: Initial Use
7. Initial use 7.1 Drum cleaning • Apply drum cleaning without any laundry in the product. NOTE a) Use the Drum Cleaning programme. b) Set the temperature to the level recommended on the special drum cleaning agent package which can be provided from Authorised Service Agents. -
Page 25: Preparing To Wash
8. Preparing to wash 8.1 Sorting the laundry a) Sort laundry according to type of fabric, colour, and degree of soiling and allowable water temperature. b) Follow instructions on the garment tags. c) Do not wash colours and whites together. New and dark coloured cottons may release a lot of dye. -
Page 26: Preparing Laundry For Washing
8.2 Preparing laundry for washing a) Laundry items with metal attachments such as, underwiring, belt buckles or metal buttons will damage the product. Remove the metal pieces or wash such clothes by putting them in a laundry bag or pillow case. This kind of clothes may overheat in the Refresh programme and in the Wash&Wear auxiliary function selection and harm your laundry. -
Page 27: Correct Load Capacity
8.4 Correct load capacity a) The maximum load capacity depends on the type of laundry, the degree of soiling and the desired washing programme. b) The product automatically adjusts the water amount according to the weight of the laundry put inside it. •... -
Page 28: Detergent, Softener And Other Cleaning Agents
The detergent drawer is composed of three compartments: – (1) for prewash – (2) for main wash – (3) for softener – ( ) in addition, there is a siphon piece in the softener compartment. 8.5.2 Detergent, softener and other cleaning agents a) Add detergent and softener before starting the washing programme. -
Page 29: Using Liquid Or Gel Detergent
8.5.5 Using liquid or gel detergent a) Do not forget to place the liquid detergent cup into the main wash compartment. b) If the liquid detergent has lost its fluidity, dilute it with water before putting in the detergent cup. b) When using gel detergent, fill the detergent into this cup before starting the programme. -
Page 30: Using Starch
• Do not use liquid detergents or other cleaning products other than fabric softeners produced for washing machines to soften the clothes. WARNING! 8.5.9 Using starch a) Place liquid or dust starch on softener compartment and start the rinsing programme. b) Do not use softener and starch together. -
Page 31: Programmes And Auxiliary Functions
9. Programmes and auxiliary functions 9.1 Programme selection • Programmes are limited with the highest spin speed appropriate for that particular type of fabric. NOTE • When selecting a programme, always consider the type of fabric, colour, degree of soiling and permissible water temperature. -
Page 32: Programmes
9.2 Programmes • You can see laundry type and washing suggestions on clothing tags. NOTE • Bavlna Eco (Cottons Eco) Use to wash your normally soiled, durable cotton and linen laundry. Although it washes longer than all other programmes, it provides high energy and water savings. - Page 33 • Deti a alergici (Hygiene+) Use this programme for your laundry (baby clothes, bed sheets, bedlinen, underwear, etc. cotton items) for which you require an anti-allergic and hygienic washing at high temperature with intensive and long washing cycle. The high level of hygiene is ensured thanks to long heating duration and additional rinsing step.
- Page 34 • Odstredování (Spin+Drain) Use to drain the water in the product. • Máchání (Rinse) Use when you want to rinse or starch separately. • Košile (Shirts) This programme is used to wash the shirts made from cotton, synthetic and synthetic blended fabrics altogether. It reduces wrinkles. When "Quick Wash"...
- Page 35 • Extra rychlé praní (Daily Express / Xpress Super Short) Use this programme to wash your lightly soiled and unspotted cotton clothes in a short time. When the "Quick Wash" setting button is pressed, programme duration can drop to 14 minutes. 2 (two) kg of laundry must be washed maximum.
- Page 36 Blood Chocolate Pudding Grass When the "Quick Wash" button is pressed once Butter Curry Coffee Fruit juice Ketchup When the "Quick Wash" button is pressed twice Red wine Starch Coal • Select the stain programme. • Select the stain you want to clean by locating it in the groups above and using the "Quick Wash"...
-
Page 37: Programme Table
9.3 Programme table Auxiliary functions Selectable Programme temperature range °C 2,40 1400 • • • • Cold-90 1,70 1400 • • • • Cold-90 Bavlna 0,85 1400 • • • • Cold-90 0,55 1400 • • • • Cold-90 60** 0,965 1400 Cold-60... - Page 38 ** “Cotton Economic 40°C" and "Cotton Economic 60°C" are standard programmes. These programmes are known as "40°C cotton standard programme" and "60°C cotton standard programme" and indicated with the symbols on the panel. • Water and power consumption may vary from the above table subject to the changes in water pressure, water NOTE hardness and temperature, ambient temperature, type and...
-
Page 39: Auxiliary Function Selection
9.4 Auxiliary function selection • When you try to change an auxiliary function that is not allowed to be selected with the current programme, NOTE indicator light of the relevant auxiliary function will not flash, only an audio warning is given. Frames of available options will be lit. -
Page 40: Auxiliary Functions
9.4.1 Auxiliary functions • Predpírka (Prewash) A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy, water, detergent and time. • Extra Máchání (Extra Rinse) This function enables the product to make another rinsing in addition to the one already made after the main wash. -
Page 41: Functions/Programmes Selected By Pressing The Function Buttons For
9.4.2 "Functions/Programmes Selected by Pressing the Function Buttons for 3 Seconds" • Drum Cleaning • This is not a Laundry washing programme. It is a maintenance programme. • Do not run this programme when there are any objects in CAUTION! the machine. - Page 42 • Child Lock Use Child Lock function to prevent children from tampering with the product. Thus you can avoid any changes in a running programme. • You can switch on and off the product with On / Off button when the Child Lock is active. When you switch on the product NOTE again, programme will resume from where it has stopped.
-
Page 43: Programme Setting
10. Programme setting 10.1 Temperature selection a) Whenever a new programme is selected, the recommended temperature for the selected programme appears on the temperature indicator. b) To decrease the temperature, press the Temperature Adjustment button. Temperature will decrease gradually. c) It turns back to the beginning after "Cold" option and arrives at the highest temperature selectable according to the programme. -
Page 44: Quick Wash Setting (Zrychlené Praní)
• Rinse Hold If you are not going to unload your clothes immediately after the programme completes, you can use rinse hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled when there is no water in the machine. -
Page 45: Starting The Programme
10.4 Starting the programme a) Press Start / Pause button to start the programme. b) Programme follow-up light showing the startup of the programme will turn on. 2 45 10.5 Programme steps a) The symbols below appear on programme follow-up indicator after the programme starts. -
Page 46: End Of Programme
10.6 End of programme a) "End" symbol appears on the display when the programme is complete. 2 45 • If you do not press any button for 10 minutes, the product will turn off automatically. Display and all indicators are NOTE turned off. -
Page 47: Programme Options
11. Programme options 11.1 Setting the end time • Do not use liquid detergents without a liquid cup when you activate End Time function. There is the risk of staining of NOTE the clothes. • When the End Time selection is completed, the time appears on the display is the end time chosen plus the duration of the selected programme. -
Page 48: Cancelling The End Time Setting
Adding laundry during End Time countdown. a) Press the Start / Pause button. b) The loading door will open and the door symbol on the display will go off. c) Open the loading door and add laundry. d) Close the loading door. f) Press the Start / Pause button. -
Page 49: Cancelling The Programme
c) If the water level in the machine is suitable, the door lock will be deactivated and the door will open, allowing you to add garments. The door lock icon on the display goes off when the door lock is deactivated. -
Page 50: Additional Features
12. Additional features 12.1 Activating and deactivating the audio warning a) Press and hold 1st and 2nd auxiliary function buttons for 3 seconds to activate and deactivate the audio warning. b) Programme selection display on the panel will count down as “3, 2, 1”. c) If the audio warning is active it will be deactivated and vice versa. -
Page 51: Opening The Loading Door In Case Of Power Failure
12.2.1 Opening the loading door in case of power failure: • In case of power failure, you can use the loading door emergency handle under the pump filter cap to open the NOTE loading door manually. • To avoid any water overflow before opening the loading door, make sure there is no water left inside the machine. -
Page 52: Maintenance And Cleaning
13. Maintenance and cleaning 13.1 Cleaning the detergent drawer • Clean the detergent drawer at regular intervals (every 4-5 washing cycles) as shown below in order to prevent NOTE accumulation of powder detergent in time. • If more than normal amount of water and softener mixture starts to gather in the softener compartment, the siphon must be cleaned. -
Page 53: Cleaning The Water Intake Filters
13.4 Cleaning the water intake filters There is a filter at the end of each water intake valve at the rear of the product and also at the end of each water intake hose where they are connected to the tap. These filters prevent foreign substances and dirt in the water to enter the product. -
Page 54: Cleaning Dirty Filters
13.5.1 Cleaning dirty filters • Temperature of the water inside the product may rise up to 90 ºC. To avoid the risk of scalding, clean the filter after the water inside the product has cooled down. CAUTION! a) Unplug the product. b) Open the filter cap. -
Page 55: Troubleshooting
14. Troubleshooting Problem Cause Solution Programs do not Start / Pause / Cancel button is • Press Start / Pause / Cancel button. not pressed. start after the It may be difficult to close • Reduce the amount of laundry and make loading door is sure that the loading door is closed the loading door in case of... - Page 56 Problem Cause Solution No water can be Water is inside the invisible • This is not a failure. part of the product. seen in the product during washing. Loading door cannot Loading door lock is activated • Drain the water by running the Pump or because of the water level in Spin programme.
- Page 57 Problem Cause Solution Programme Timer may stop during water • Timer indicator will not countdown until the product takes in adequate amount of intake. time does not water. The product will wait until there is countdown. (On sufficient amount of water to avoid poor models with display) washing results due to lack of water.
- Page 58 Problem Cause Solution Washing Insufficient amount of • Use the recommended amount of detergent appropriate for water detergent is used. performance is poor: hardness and the laundry. Stains persist or Excessive laundry is loaded in. • Do not load the product in excess. Load the laundry is not with amounts recommended in the whitened.
- Page 59 Problem Cause Solution Laundry became Insufficient amount of • Using insufficient amount of detergent for the water hardness can cause the detergent is used. stiff after washing. laundry to become stiff in time. Use (**) appropriate amount of detergent according to the water hardness. Detergent was put in the •...
- Page 60 Problem Cause Solution Too much foam Improper detergents for the • Use detergents appropriate for the washing machine. washing machine is used. forms inside the product. (**) Excessive amount of • Use only sufficient amount of detergent. detergent is used. Detergent was stored under •...