Page 1
Washing Machine User Manual WTV 8744 XDOS Document Number : 2820526673_EN/ 05-05-20.(18:10)
Page 2
Dear Customer, Please read this user manual first! Thank you for preferring a Beko product. We hope that you get the best results from our product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
1. General safety instructions 1.1 Children's safety • Children under the age of should be kept away unless continuously supervised. • This product can be used by children at and WARNING! above years old and by persons whose physical, sensory or mental capabilities were not fully developed or who lack experience and knowledge provided that they are supervised or trained on the safe usage of the product and...
1.2 Product safety • Unplug the product when not in use. • Always have the installation and repairing procedures carried out by the Authorised WARNING! Service Agent. • Do not force open the locked loading door. The door will open immediately after the washing cycle has ended.
1.4 Hot surface safety • The glass of the loading door gets too hot while washing at high temperatures. Therefore, especially do not allow children touch the glass while washing. WARNING! 1.5 Other • Do not use combustible, flammable and other similar chemicals for product cleaning or other purposes.
2. Instructions for environmental protection 2.1 Compliance with WEEE Directive This product does not contain harmful and forbidden materials described in the "Regulation on the Control of the Waste Electrical and Electronic Equipment" issued by T.R. Ministry of Environment and Urbanization. It complies with the WEEE Directive.
Following information will help you use the product in an ecological and energy-efficient manner. a) Operate the product in the highest load capacity allowed for the programme you have selected, but do not overload. See, “Programme and consumption table”. b) Follow the recommended temperatures in the programme and consumption table.
4.2 Package contents Power cable Water discharge hose Transportation safety bolts Mains water inlet hose User manual Plastic plug assembly • Figures in this manual are schematic and may not match the product exactly. NOTE EN / 11 Washing Machine / User’s Manual...
5.Technical specifications Complying Commission Delegated Regulation (EU) No 1061/2010 Supplier name or trademark Beko Model name WTV 8744 XDOS Rated capacity (kg) Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency) A+++ Annual Energy Consumption (kWh) Energy consumption of the standard 60°C cotton programme at full load (kWh)
6. Installation 6.1 Appropriate installation location • Damaged products cause risks for your safety. - Prior to installation, visually check if the product has any defects on it. WARNING! - If so, do not have it installed. • Do not place the product on a floor without sufficient capacity to carry the load.
6.2 Removing packaging reinforcement • Seek someone's help for this procedure. - Risk of getting injured. CAUTION! To remove the packaging reinforcement; a) Tilt the product backwards. b) Remove the packaging reinforcement by pulling the ribbon. 6.3 Removing transportation safety bolts •...
c) After removing bolts, close the holes with plugs provided in the user manual bag. • Keep the transportation safety bolts in a safe place for reuse when the product needs to be moved again in the NOTE future. • Before moving the product, install the transportation safety bolts in reverse order of the disassembly procedure.
a) Connect the straight end of the mains inlet hose provided with the product to the cold water tap and the warped end to the water inlet on the back of the product as shown in the figure. b) Tighten all hose nuts by hand securely. Never use a tool when tightening the nuts.
d) To prevent the waste water to go back into the product again and to ensure easy drainage, do not immerse the end of the hose into the waste water or do not insert it into the drain for more than 15 cm. If it is too long, cut it short.
a) Loosen the lock nuts on the feet by hand. b) Adjust the feet until the product stands level and balanced. c) Tighten all lock nuts again by hand. 6.7 Electrical connection • Damaged power cables must be replaced by the Authorised Service Agents.
7. Initial use 7.1 Drum cleaning • Apply drum cleaning without any laundry in the product. NOTE a) Use the Drum Cleaning programme. b) Set the temperature to the level recommended on the special drum cleaning agent package which can be provided from Authorised Service Agents.
8. Preparing to wash 8.1 Sorting the laundry a) Sort laundry according to type of fabric, colour, and degree of soiling and allowable water temperature. a) Follow instructions on the garment tags. a) Do not wash colours and whites together. New and dark coloured cottons may release a lot of dye.
8.2 Preparing laundry for washing a) Remove the metal pieces such as support wire, belt buckle or metal buttons or wash the clothes by putting them in a laundry bag or pillow case. b) Take out all substances in the pockets such as coins, pens and paper clips, and turn pockets inside out before washing.
8.4 Using detergent and softener 8.4.1 Detergent drawer The detergent drawer is composed of three compartments: – (1) Liquid detergent compartment – (2) Powder detergent compartment – (3) Softener compartment 8.4.2 Detergent, softener and other cleaning agents • When using detergent, softener, starch, fabric dye, bleach and descaling agents to be added through the detergent NOTE container 2, read the manufacturer's instructions written...
a) Add detergent and softener before starting the washing programme. b) Place the detergent bag or the dispensing ball directly among the laundry in the product. c) There is no pre-wash compartment or pre-wash option in your product. • Close the detergent drawer before starting the washing programme and never open the drawer while the product is running.
Page 26
c) When adding liquid detergent or softener, do not exceed the tip of the «Max» label. d) Close the lid. e) Close the detergent drawer by pushing it slowly. f) After closing the detergent drawer, the flashing dosing symbol ( ) will start to light up steadily.
8.4.4 Dose selection and cancellation or powder detergent use a) For some programmes of the machine, liquid detergent could not be selected. In such cases, powder detergent should be used. Please see the Programme Table for details. b) After selecting the temperature, spin speed and auxiliary function, start the programme by pressing the started/pause button.
d) If the softener symbol is off, this means no softener will be used in the rinsing step. The first position on the display: means liquid detergent is active, softener is on. If liquid detergent and softener symbols are active on the display, the liquid detergent will become on and the softener will become off after you press the Auto Dosing key for the first time.
8.4.8 Adjusting detergent amount a) The amount of washing detergent to be used depends on the amount of laundry, the degree of soiling and water hardness. b) Do not use amounts exceeding the dosage quantities recommended on the detergent package to avoid excessive foam and poor rinsing. c) Use lesser detergent for small amounts or lightly soiled clothes.
9. Programmes and Auxiliary Functions 9.1 Programme selection • Programmes are limited with the highest spin speed appropriate for that particular type of fabric. NOTE • When selecting a programme, always consider the type of fabric, colour, degree of soiling and permissible water temperature.
9.2 Programmes • You can see laundry type and washing suggestions on clothing tags. NOTE • Katoen Eco (Cottons Eco) Use to wash your normally soiled, durable cotton and linen laundry. Although it washes longer than all other programmes, it provides high energy and water savings.
Page 32
• Hygiene+ Use this programme for your laundry (baby clothes, bed sheets, bedlinen, underwear, etc. cotton items) for which you require an anti-allergic and hygienic washing at high temperature with intensive and long washing cycle. The high level of hygiene is ensured thanks to long heating duration and additional rinsing step.
Page 33
• Centrifugeren+Pompen (Spin+Drain) Use to drain the water in the product. • Spoelen (Rinse) Use when you want to rinse or starch separately. • Hemden (Shirts) This programme is used to wash the shirts made from cotton, synthetic and synthetic blended fabrics altogether. It reduces wrinkles. When the "Quick Wash"...
Page 34
• StainExpert The machine has a special stain programme which enables the removal of different types of stains in the most effective way. Use this programme only for durable colourfast cotton laundry. Do not wash delicate and pigmenting clothes and laundry in this programme. Before washing, garment tags should be checked (recommended for cotton shirts, trousers, shorts, t-shirts, baby clothes, pyjamas, aprons, table clothes, bed sheets, duvet covers, pillowcases, bath-beach towels, towels, socks, cotton...
Page 35
Coffee Fruit juice Ketchup When the "Quick Wash" button is pressed twice Red wine Starch Coal • Select the stain programme. • Select the stain you want to clean by locating it in the groups above and using the "Quick Wash"...
Page 37
** “Cotton Economic 40°C" and "Cotton Economic 60°C" are standard programmes. These programmes are known as "40°C cotton standard programme" and "60°C cotton standard programme" and indicated with the symbols on the panel. • Water and power consumption may vary from the above table subject to the changes in water pressure, water NOTE hardness and temperature, ambient temperature, type and...
9.4 Auxiliary function selection • When you try to change an auxiliary function that is not allowed to be selected with the current programme, indicator NOTE light of the relevant auxiliary function will not flash, only an audio warning is given. Frames of available options will be lit. •...
• Nacht Modus (Night Mode) Use to wash the cottons with lesser energy consumption and silently. Spin steps are cancelled for a silent washing and the cycle ends with the Rinse Hold step. After completion of the programme, run Spin cycle to spin the laundry.
Page 40
• Auto Dosing Setting You can enable this function by pressing the auxiliary function key 3 for 3 seconds. With this function, the dosing amounts of the Liquid Detergent and Softener are changed. Changing the dosing amounts of Liquid Detergent and Softener: a) Press and hold Auxiliary Function button 3 for 3 seconds.
Page 41
• Child Lock Use Child Lock function to prevent children from tampering with the product. Thus you can avoid any changes in a running programme. • You can switch on and off the product with On / Off button when the Child Lock is active. When you switch on the NOTE product again, programme will resume from where it has stopped.
10. Programme setting 10.1 Temperature selection a) Whenever a new programme is selected, the recommended temperature for the selected programme appears on the temperature indicator. b) To decrease the temperature, press the Temperature Adjustment button. Temperature will decrease gradually. c) It turns back to the beginning after "Cold" option and arrives at the highest temperature selectable according to the programme.
• Rinse Hold If you are not going to unload your clothes immediately after the programme completes, you can use rinse hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled when there is no water in the machine.
10.4 Starting the programme a) Press Start / Pause button to start the programme. b) Programme follow-up light showing the startup of the programme will turn on. 2 45 10.5 Programme steps a) The symbols below appear on programme follow-up indicator after the programme starts.
10.6 End of programme a) "End" symbol appears on the display when the programme is complete. 2 45 • If you do not press any button for 10 minutes, the product will turn off automatically. Display and all indicators are NOTE turned off.
11. Programme options 11.1 Setting the end time • Do not use liquid detergents without a liquid cup when you activate End Time function. There is the risk of staining of NOTE the clothes. • When the End Time selection is completed, the time appears on the display is the end time chosen plus the duration of the selected programme.
Adding laundry during End Time countdown. a) Press the Start / Pause button. b) The loading door will open and the door symbol on the display will go off. c) Open the loading door and add laundry. d) Close the loading door. f) Press the Start / Pause button.
c) If the water level in the machine is suitable, the door lock will be deactivated and the door will open, allowing you to add garments. The door lock icon on the display goes off when the door lock is deactivated.
12. Additional features 12.1 Activating and deactivating the audio warning a) Press and hold 1st and 2nd auxiliary function buttons for 3 seconds to activate and deactivate the audio warning. b) Programme selection display on the panel will count down as “3, 2, 1”. c) If the audio warning is active it will be deactivated and vice versa.
b) Release the loading door emergency handle located at the rear side of the filter cap. c) Pull down the loading door emergency handle once and open the loading door. After opening the loading door, re-insert the loading door emergency handle. d) If the loading door does not open, try again by pulling down the handle.
i) If you are not going to use the product for a long time (for example, when going to the summer house and when returning - 3 months or more) (the washing agent may increasingly thicken and get hardened in the end, and thus the system may not perform dosing even if it shows that the compartments are full.) 13.1.2.
g) Use a flat screwdriver to remove the tabs holding the upper cover of the detergent drawer (there are 6 tabs in total: two on the right side of the drawer, two on the left and two at the back) and wash the inside of the drawer.
13.4 Cleaning the water intake filters There is a filter at the end of each water intake valve at the rear of the product and also at the end of each water intake hose where they are connected to the tap. These filters prevent foreign substances and dirt in the water to enter the product.
13.5.1 Cleaning dirty filters • Temperature of the water inside the product may rise up to 90ºC. To avoid the risk of scalding, clean the filter after the water inside the product has cooled down. CAUTION! a) Unplug the product. b) Open the filter cap.
14. Troubleshooting Problem Cause Solution Programs do not Start / Pause / Cancel button is • Press Start / Pause / Cancel button. not pressed. start after the It may be difficult to close • Reduce the amount of laundry and make loading door is sure that the loading door is closed the loading door in case of...
Page 56
Problem Cause Solution No water can be Water is inside the invisible • This is not a failure. part of the product. seen in the product during washing. Loading door cannot Loading door lock is activated • Drain the water by running the Pump or because of the water level in Spin programme.
Page 57
Problem Cause Solution Product does not There is unbalanced load in the • Automatic unbalanced load detection system is activated due to the unbalanced product. switch to spinning distribution of the laundry in the product. step. (*) The product will not spin if •...
Page 58
Problem Cause Solution Colour of the clothes Excessive laundry was loaded in. • Do not load the product in excess. faded. (**) Detergent in use is damp. • Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures.
Page 59
Problem Cause Solution Too much foam Improper detergents for the • Use detergents appropriate for the washing machine. washing machine is used. forms inside the product. (**) Excessive amount of • Use only sufficient amount of detergent. detergent is used. Detergent was stored under •...