Table of Contents
Advertisement
Optic Transceiver Removal Using the Optics Extraction Tool
Step 1
Remove the fiber-optic cables from the transceiver module before removing the transceiver module.
Step 2
Use the wide side of the optics extraction tool to release the bale latch (see the following image).
Step 3
Use the narrow end of the optics extraction tool to carefully remove the transceiver module (see the following
image).
Step 4
Place the transceiver module in an antistatic bag or other protective environment.
Cisco Nexus 9348D-GX2A ACI-Mode Switch Hardware Installation Guide
36
Connecting the Switch to the ACI Fabric
Advertisement
Chapters
Table of Contents
