Pair The Usb Hd Adapter To Your Headset; Alternate Between Active Bluetooth Sources; Delete Paired Devices - Cisco Headset 730 User Manual

Hide thumbs Also See for Headset 730:

Table of Contents

Your Headset

Pair the USB HD Adapter to Your Headset

You can re-pair your USB HD Adapter if you have erased your headset's Bluetooth pairings or need to replace

your adapter.

Procedure

Step 1

Connect the USB HD Adapter to your chosen device.

Step 2

Use a pen or a paper clip to press down the Pairing button on the USB HD Adapter for four seconds. The

blue LED on top of the adapter blinks when it enters pairing mode.

Step 3

On your headset, slide and hold the Power/Bluetooth switch for two seconds. The adapter and your headset

pair automatically.

You can connect up to two Bluetooth devices to your headset at one time. Active calls are automatically placed

on hold when you answer a call on a different source.

Procedure

To change your Bluetooth source, play music or answer a call on a different connected source.

Note

You can erase all paired Bluetooth devices from your headset.

Note

This will also erase the Cisco Headset USB HD Adapter from your headset's memory. See

Adapter to Your Headset, on page 7

Procedure

Slide and hold the Power/Bluetooth switch for nine seconds. If audible notifications are enabled, your headset

plays an audio prompt when it erases all Bluetooth devices.

Pause music playback before you switch to a different music source.

to re-pair the adapter to your headset.

Pair the USB HD Adapter to Your Headset

Pair the USB HD

Cisco Headset 730 User Guide

Table of Contents